Used Bio-Rad 1000/500 For Sale

Asking Price
Only 1 Available on the Marketplace!

Vero T.

Member since: November 2012

More listings by this seller

Make an Offer Ask the Seller a Question
Bio-Rad 1000/500
Listing Reference:

This listing is for a used Bio-Rad Model 1000/500 power supply for electrophoresis and blotting.

This Model 1000/500 power supply unit provides constant voltage to dual-output-jacks under a variety of operating conditions. Voltage is continuously adjustable from 5 to 1,000 volts, producing up to 250 watts of power. Current limits can be set from 0 to 500 milliamperes. The Model 1000/500 is a truly versatile power supply, being capable of providing the voltage for IEF, the current for multiple PAGE gels, and the control required for experimental reproducibility.

Features of the Model 1000/500 Power Supply:
-Programmable step functions which automatically alter the power conditions with no need to touch the supply
-Current measurement to 10 microamperes for monitoring focusing experiments to completion
-Volt-hour integration and/or volt-hour control for experimental reproducibility
-No-load detection systems to insure safe operation
-Dual LED readouts for monitoring current and voltage simultaneously
-Continuous monitoring of load resistance, power output, time, and volt-hours during the run

This unit appears to be in great condition with only minor, superficial marks on the body.

The unit does power up and recognizes a lack of load (no output terminals) and immediately shuts down its cycles. The cooling fan also powers up with no hesitation.

All of the buttons work well with no lag in function. The display has no missing pixels and has an accurate readout.

We have not tested this machine on the field nor do we guarantee that this unit will work as intended .

The Bio-Rad Model 1000/5000 Power Supply features:

-1 min. to 1,000 hours timer, 0.01 hour steps, continuously adjustable
-No load detection with LED display and alarm
-Dual output jacks in parallel
-Dual LED readouts
-Programmability: three steps in continuous sequence, either time or volt-hour limited
-Volt-hour control: 0 to 1,000,000 volt-hours, 10.0 volt-hour steps, continuously adjustable
-Overload and short protection: Fuse, and internal limits
-Line regulation: +/-0.5% @ 1,000 VDC
-RMS ripple and noise: Less than 2% at 1,000 VDC and 250W
-Drift: +/-0.5% after 30 minutes
---Voltage: 5 to 1,000 VDC
---Current: 0 to 500mA
---Power: 0 to 250 watts
---Voltage: 5 to 1,000 volts, 1 V step
---Current: 0.01 to 500 milliamps, 0.01mA step
---Power: 1 to 250 watts, 1 W step, automatic crossover upon reaching limit
-Set point accuracy (output and limit):
---Voltage: +/- 1% 0 to 1,000 VDC
---Current: +/- 1% 0.0000 10 to 500mA
---+/- 1% 0 to 250W
-Operating Temperature: 0 to 35C
-Line voltage frequency: 90 to 132 VAC (47-63Hz)
-Dimensions (W x L x H): 16.5cm x 31cm x 13.5cm / 6.5in. x 12.2in. x 5.31in.
-Weight: 6.2 lbs.

Used equipment can sell very quickly. Contact the seller asap to discuss this Bio-Rad 1000/500.

Contact the Seller
Asking Price
Only 1 Available on the Marketplace!

Vero T.

Member since: November 2012

More listings by this seller

Contact the Seller
Contact the Seller

Contact the Seller

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.