Used DigiDesign SMPTE SlaveDriver For Sale

Asking Price
$050
Stock:
Only 1 Available on the Marketplace!
Seller:
Member ID 11125 - avatar

Dan C.

Member since: May 2008

More listings by this seller

Make an Offer Ask the Seller a Question
Name:
Digidesign SMPTE SlaveDriver
Listing Reference:
88659
Price:
$050
Location:
Massachusetts, US
Age:
Unknown
Condition:
4
Description:

The SMPTE Slave Driver (MH034, SSD) is a synchonization peripheral used to resolve Digidesign systems to LTC/SMPTE.

Supported Interfaces: 888 I/O, 882 I/O, 882 Studio, 442 I/O, ProMaster 20.
Sample Rates: 44056 (44.1k Pull Down), 44100, 44144 (44.1k Pull Up), 47952 (48k Pull Down), 48000, 48048 (48k Pull Up).
LTC Input: Balanced XLR female connector, -20 to +22 dBu level, 200k differential input impedance.
LTC Output: Balanced XLR male connector, 2.5V p-p balanced (+3.8 dBu RMS), <100ohms output impedance.
Slave Clock Output: 256 times Sample Rate, HCTTL level, 75ohms BNC connector.
Slave Clock Input and Output: 256 times Sample Rate, HCTTL level, 75ohms BNC connector.
External Clock Input: 1x or 256x Sample Rate (rear panel switch selectable), HCTTL level, 75ohms BNC connector.
MIDI MTC Output: 5-Pin DIN connector, MIDI current loop.
Mac MTC Output/SysEx Input: 8-pin mini DIN connector, RS-422 levels, 1MHz clock rate.
MIDI SysEx Input: 5-pin DIN connector, MIDI current loop, reverse polarity protected rear panel switch selectable Mac/MIDI.
Varispeed Range: Nominal rate +/-10%.
Lock Indication: LED lights when total position error is less than +/- 5 LTC cells (+/- .0625 frames).
Speed Calibration: LED lights steadily when Slave lock Output freq is equal to 256 times the nominal Sample Rate +/- 250 pp.
AC Input: 90 to 260 VAC, 47 to 63 Hz, 43 W max.
Dimensions & Weight: 1U external rack mount device, 19" x 10.5" x 1.7", 4.1 lbs.
Freewheel Range: Approximately 10 - 20 frames.

Front panel (L to R): Power Switch, Mode button/LEDs (Resolve, Gen from Int, Gen from Slave, Gen from Ext), Frame Rate button/LEDs (30, 29.97, 25, 24, Drop Frame), Sample Rate button/LEDs (44.1kHz, 48kHz, Pull Up, Pull Down), SMPTE Input LED, Lock LED, Speed Calibration LED. Rear Panel (L to R): SMPTE Input, SMPTE Output, Slave Clock Input, Ext Sync Select switch (256x, 1x), External Sync Input, Slave Clock Output, SysEx MIDI Input, MTC Output, SysEx Source switch (MIDI Input, Mac Port), Mac Port

Used equipment can sell very quickly. Contact the seller asap to discuss this DigiDesign SMPTE SlaveDriver.

Make an Offer Ask the Seller a Question
Asking Price
$050
Stock:
Only 1 Available on the Marketplace!
Seller:
Member ID 11125 - avatar

Dan C.

Member since: May 2008

More listings by this seller

Make an Offer Ask the Seller a Question
Make the Seller an Offer

Make the Seller an Offer

* required field

$ (USD)

Sending an offer to the seller does not constitute a legally binding agreement to purchase the equipment. However, please only make an offer if you are seriously interested.

Your offer will be emailed to the seller immediately. We will email you their reply as soon as we receive it.

Ask the Seller a Question

Ask the Seller a Question

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.