DROOP u REIN ECOMIL FS100KU

Listing description

vertical copying milling machine

with rotatable headstock, longitudinal motion and cross traverse working table, 2 independent stepless adjustable direct current motors, automatic copying attachment for room milling, contour milling (360°) and contour room milling, with comb. room sensor and contour sensor for all kinds of milling, as well as complete electric equipment for three phase current 380 Volt, incl. on the right table saddle turning and rotatable ordered control panel

milling machine:
diameter in the front bearing : 100 mm
die holder, steep cone : 50
throat : 700 mm
distance between spindle head and
working table, min. : 20 mm
max. : 650 mm
axial displacement : 180 mm

headstock:
vertical displacement : 450 mm
rotatable in both sides each : 30°

working table :
width : 700 mm
length : 1.800 mm
displacement, long : 1.400 mm
displacement, across : 650 mm

copying area : 1.000 x 650

Installed in the factory 1974

With rotatable headstock, longitudal and cross traverse table, 2 independent stepless adjustable direct current motors, automatic copying attachment for 3 D milling,

contour milling (360°) and contour 3 D milling, with sensors for all kinds of milling

milling spindle

diameter in front spindle 100 mmm

spindle tape SK 50

throat 700 mm

distance between spindle head and working table min/max 20/650 mm

axial movement 180 mm

headstock

vertical movement 500 mm

rotatabke both sides 30°

spindle speeds 20-1000 rev/min

working table

width x length 700 x 1800 mm

length way 1500 mm

cross way 700 mm

copying area 1000 x 650 mm

feeds

stepless adjustable within 2 steps 1-180 mm/min and 60 – 1800 mm/min

rapid feed of table 1800 mm/min

rapid feed of headstock 1200 mm/min

power/motor

milling spindle 7,5 HP

2x feed motors each 4 HP

Generator 13,6 HP

Weight 12,1 to

Extra/special equipment

Attachment for line/spline(keyway milling with fast return

Stress loop

Tool fixing

Nonius for the sleeve

Optical nonius HENSOLD-CM for the movement of table length and cross – preciseneyy 0,01 mm

Attachment for 3 D milling

Rake guard

Installed in the factory 1974

With rotatable headstock, longitudal and cross traverse table, 2 independent stepless adjustable direct current motors, automatic copying attachment for 3 D milling,

contour milling (360°) and contour 3 D milling, with sensors for all kinds of milling

milling spindle

diameter in front spindle 100 mmm

spindle tape SK 50

throat 700 mm

distance between spindle head and working table min/max 20/650 mm

axial movement 180 mm

headstock

vertical movement 500 mm

rotatabke both sides 30°

spindle speeds 20-1000 rev/min

working table

width x length 700 x 1800 mm

length way 1500 mm

cross way 700 mm

copying area 1000 x 650 mm

feeds

stepless adjustable within 2 steps 1-180 mm/min and 60 – 1800 mm/min

rapid feed of table 1800 mm/min

rapid feed of headstock 1200 mm/min

power/motor

milling spindle 7,5 HP

2x feed motors each 4 HP

Generator 13,6 HP

Weight 12,1 to

Extra/special equipment

Attachment for line/spline(keyway milling with fast return

Stress loop

Tool fixing

Nonius for the sleeve

Optical nonius HENSOLD-CM for the movement of table length and cross – preciseneyy 0,01 mm

Attachment for 3 D milling

Rake guard

All manuals are available.

This equipment is located in DE