FIAP S.P.A BLOWN EXTRUSION

Listing description

4 Extrusion Lines with their 3 Turbomixer units, FIAP S.P.A brand.
FIAP S.P.A. (ITALY) BLOW UPVC/PVC FILM EXTRUSION LINE
MODEL

: BI-EXTRUDER
YEAR

: 1987
MATERIAL
: UPVC/PVC
OUTPUT
: 300 kg/hr
MAX WIDTH OF FILM
: 1600mm
MIN WIDTH OF FILM
: 1300mm
THICKNESS OF FILM
: 15 to 60 microns
MAX REEL DIAMETER
: up to 600mm
ELECTRICAL SUPPLY
: 3 phase, 380 VAC, 50 Hz
NR OF EXTRUDERS
: 2 Horizontal Extruder
DESCRIPTION of EXTRUDERS : L/D=25:1 and L/D=30:1 extruders are fitted with heating/cooling zones,performed with electrical resistances and ventilators respectively, each driven by 61.1 kW motor
DIAMTER of BLOWING DIE : 350mm, expressly designed for extruders
CONTROL SYSTEMS : Main electrical board for controlling 22 thermoregulation zones, extrusion pressure, all equipments for protection, regulation and recording
COOLING & EXHAUST SYSTEM : Film cooling and smoke exhausting, consisting of air cooling ring, air refrigeration unit (40.000 kcal/hr), smoke suction system, complete with hood
REWINDING SYSTEM : - Drawing up and rewinding group, assembled on a big rotating thrust bearind driven by motorgear of 0.55 kW, provided with pneumatic accessories and electrical equipment, nip-roll group driven by a D.C. motor of 2.2kW

- Two turret type rewinding stations, provided with electric clutches, reduction gear, D.C. motors of 2.2 kW automatically controlled by means of straingauge equipment in order to keep constant the film tension
GRINDING SYSTEM : Inline trim edge grinder , complete with pneumatic conveyor feding the grinded material to extruders

ADDITIONAL INFORMATIONS : - Corona treatment equipment and quality, thickness control devices, nip-roll group driven by two D.C. motors one of 10.5 kW and the supplementary of 5.6 Kw

- Bubble temperature control and heating by means of infrared tunnel of 38 kW and infrared barrel of 12 kW

CONDITION OF THE LINE : - The components of the line are in good condition. Needs an extensive overhaul. Some electrical parts may be missing. All electrical boards and panels need revision.

FIAP S.P.A. (ITALY) BLOWN PVC/UPVC FILM EXTRUSION LINE
MODEL

: MINIJUMBO
YEAR

: 2001
MATERIAL
: UPVC/PVC
OUTPUT
: 330 kg/hr
MAX WIDTH OF FILM
: 2400mm
MIN WIDTH OF FILM
: 1300mm
THICKNESS OF FILM
: 15 to 60 microns
MAX REEL DIAMETER
: up to 600mm
ELECTRICAL SUPPLY
: 3 phase, 380 VAC, 50 Hz
NR OF EXTRUDERS
: 2 Horizontal Extruder
DESCRIPTION of EXTRUDERS : L/D=25:1 and L/D=30:1 extruders are fitted with special shell barrel

heater/cooling bands, each driven by 61.1 kW motor
DIAMTER of BLOWING DIE : 350mm, expressly designed for extruders
CONTROL SYSTEMS : Main electrical board for controlling 26 thermoregulation zones, extrusion pressure, all equipments for protection, regulation and recording
COOLING & EXHAUST SYSTEM : Film cooling and smoke exhausting, consisting of air cooling ring, air refrigeration unit (40.000 kcal/hr), smoke suction system, complete with hood
REWINDING SYSTEM : Two turret type rewinding stations, driven by D.C motors of 5.3 kW
GRINDING SYSTEM : Inline trim edge grinder , complete with pneumatic conveyor feding the grinded material to extruders

ADDITIONAL INFORMATIONS : - Corona treatment equipment and quality, thickness control devices, nip-roll group driven by two D.C. motors one of 10.5 kW and the supplementary of 5.6 Kw

- Bubble temperature control and heating by means of infrared tunnel of 93.6 kW and infrared barrel of 29 kW

CONDITION OF THE LINE : There are no any missing parts of the line both mechanically and electrically. All of the components run well. It may need an overhaul before running.

FIAP S.P.A. (ITALY) BLOWN PVC/UPVC FILM EXTRUSION LINE
MODEL

: TR 100/150
YEAR

: 1987
MATERIAL
: UPVC/PVC
OUTPUT
: 170 kg/hr
MAX WIDTH OF FILM
: 1200mm
MIN WIDTH OF FILM
: 900mm
THICKNESS OF FILM
: 15 to 60 microns
MAX REEL DIAMETER
: up to 600mm
ELECTRICAL SUPPLY
: 3 phase, 380 VAC, 50 Hz
NR OF EXTRUDERS
: One Horizontal axis Extruder
DESCRIPTION of EXTRUDERS : L/D=25:1 extruder is fitted with special aliminum shell barrel heater/cooling bands, driven by 61.1 kW motor
DIAMTER of BLOWING DIE : 290mm, expressly designed for extruder
CONTROL SYSTEMS : Main electrical board for controlling 12 thermoregulation zones, extrusion pressure, all equipments for protection, regulation and recording.
COOLING & EXHAUST SYSTEM : Film cooling and smoke exhausting, consisting of air cooling ring, air refrigeration unit (40.000 kcal/hr), smoke suction system, complete with hood
REWINDING SYSTEM : - Drawing up and rewinding group, assembled on a big rotating thrust bearind driven by motorgear of 0.55 kW, provided with pneumatic accessories and electrical equipment, nip-roll group driven by a D.C. motor of 2.2kW

- Two turret type rewinding stations, provided with electric clutches, reduction gear, D.C. motors of 2.2 kW automatically controlled by means of straingauge equipment in order to keep constant the film tension
GRINDING SYSTEM : Inline trim edge grinder , complete with pneumatic conveyor feding the grinded material to extruders

ADDITIONAL INFORMATIONS : - Corona treatment equipment and quality, thickness control devices, weighing and discharging nip-roll group driven by two D.C. motors one of 10.5 kW and the supplementary of 5.6 Kw

- Bubble temperature control and heating by means of infrared tunnel of 38 kW and infrared barrel of 12 kW

CONDITION OF THE LINE : There are no any missing parts of the line both mechanically and electrically. All of the components run well. All electrical boards are overhauled and renewed. It may need an overhaul before running.

FIAP S.P.A. (ITALY) BLOWN UPVC/PVC FILM EXTRUSION LINE
MODEL

: TR 100/150
YEAR

: 1987
MATERIAL
: UPVC/PVC
OUTPUT
: 170 kg/hr
MAX WIDTH OF FILM
: 1200mm
MIN WIDTH OF FILM
: 900mm
THICKNESS OF FILM
: 15 to 60 microns
MAX REEL DIAMETER
: up to 600mm
ELECTRICAL SUPPLY
: 3 phase, 380 VAC, 50 Hz
NR OF EXTRUDERS
: One Horizontal axis Extruder
DESCRIPTION of EXTRUDERS : L/D=25:1 extruder is fitted with special aliminum shell barrel heater/cooling bands, driven by 61.1 kW motor
DIAMTER of BLOWING DIE : 290mm, expressly designed for extruder
CONTROL SYSTEMS : Main electrical board for controlling 12 thermoregulation zones, extrusion pressure, all equipments for protection, regulation and recording.
COOLING & EXHAUST SYSTEM : Film cooling and smoke exhausting, consisting of air cooling ring, air refrigeration unit (40.000 kcal/hr), smoke suction system, complete with hood
REWINDING SYSTEM : - Drawing up and rewinding group, assembled on a big rotating thrust bearind driven by motorgear of 0.55 kW, provided with pneumatic accessories and electrical equipment, nip-roll group driven by a D.C. motor of 2.2kW

- Two turret type rewinding stations, provided with electric clutches, reduction gear, D.C. motors of 2.2 kW automatically controlled by means of straingauge equipment in order to keep constant the film tension
GRINDING SYSTEM : Inline trim edge grinder , complete with pneumatic conveyor feding the grinded material to extruders

ADDITIONAL INFORMATIONS : - Corona treatment equipment and quality, thickness control devices, weighing and discharging nip-roll group driven by two D.C. motors one of 10.5 kW and the supplementary of 5.6 Kw

- Bubble temperature control and heating by means of infrared tunnel of 38 kW and infrared barrel of 12 kW

CONDITION OF THE LINE : - The components of the line are in good condition. Needs an extensive overhaul. Main control board need revision.

BLOW UPVC/PVC FILM EXTRUSION LINE TURBOMIXERS

COMPOUNDING PLANTS #1&2
TURBOMIXER
MANUFACTURER
: Caccia S.p.A / ITALY
CAPACITY

: 500 lt
DRY-BLEND PRODUCTION OUTPUT : ~500 kg/h
MATERIAL

: Stainless Steel
ACCESSORIES EQUIPMENT
: Mixing Blades
ELECTRICAL SUPPLY
: 380 Vac, 50 Hz, 3 Phase
MOTOR POWER
: 88 kW
COOLER
CAPACITY

: 1200 lt
COOLING
: Water, circulating in stainless steel jacket
ACCESSORIES EQUIPMENT : Stirring paddle, pneumatic lock device for dry-blend discharge
ELECTRICAL SUPPLY
: 380 Vac, 50 Hz, 3 Phase
MOTOR POWER
: 15 kW

COMPOUNDING PLANT #3
TURBOMIXER
MANUFACTURER
: Caccia S.p.A / ITALY
CAPACITY

: 600 lt
DRY-BLEND PRODUCTION OUTPUT : ~500 kg/h
MATERIAL

: Stainless Steel
ACCESSORIES EQUIPMENT
: Mixing Blade
ELECTRICAL SUPPLY
: 380 Vac, 50 Hz, 3 Phase
MOTOR POWER
: 123 kW
COOLER
CAPACITY

: 1700 lt
COOLING
: Water, circulating in stainless steel jacket
ACCESSORIES EQUIPMENT : Stirring paddle, pneumatic lock device for dry-blend discharge
ELECTRICAL SUPPLY
: 380 Vac, 50 Hz, 3 Phase
MOTOR POWER
: 15 kW
CONDITION OF TURBOMIXERS : All the equipments are in good condition both mechanically and electrically. There are no missing equipment in the system.

This equipment is located in TR