OKUMA UNIVERSAL GCU, 16.9" x 80

Listing description

16.9" x 80" (429.26 x 2032 mm) OKUMA UNIVERSAL CYLINDRICAL GRINDER
Serial No 4406-0720, Model GCU

EQUIPPED WITH:
Internal Grinding Spindle Attachment (Swing Down)
Variable Speed Workhead
Lever/Screw Footstock - (2) Work Rests
Coolant System w/Magnetic Seperator

CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum.............. 16.9"
Distance Between Centers, Nominal...... 80.4"
Grinding Diameter w/14" Wheel.......... 16.5"
Weight Capacity Between Centers........ 1100 LBS
Grinding Wheel Diameter, Minimum....... 10.8"
Grinding Wheel Diameter, Standard...... 14"
Grinding Wheel Width, Standard......... 1.25"
Grinding Wheel Width, Maximum.......... 3"
Grinding Wheel Hole Diameter........... 6"
Table Swivel Adjustment, Maximum....... 5-DEG 20-MIN
Headstock Swivel Range................. 90-DEGREES
Grinding Wheel-Slide Swivel On Base.... 90-DEGREES
Tailstock Center Taper................. #5 Morse
Workhead Center Taper.................. #5 Morse
Grinding Wheel Speeds, Range........... 1500 & 1800 RPM
Workhead Spindle Speeds, Range......... 10 to 150 RPM
Table Longitudinal Feeds, Range........ 2 to 144 IPM
Grinding Wheelhead Spindle Motor....... 5 HP
Workhead Motor, Horsepower............. 1 HP
Floor Space Required, L x D............ 255" x 90"
Weight, Approximately.................. 15,140 LBS

PRICE: F.O.B. OUR WAREHOUSE.........USD $19500

This equipment is located in US