Toshiba Toshiba FDX4343

Listing description

Toshiba FDX4343R Flat Panel Detector

Flat Panel Sensor Unit:

Sensor Protection Plate: Carbon Fiber Plate
Cooling: Natural Air Cooling
Input: DC24V (from AC/DC Power Supply)
Power Consumption: Maximum 20W
Overall Dimensions: 512×495×43mm (W(H)×D(V)×(H))
Weight: 16kg

Power Supply Unit:

Input: AC100 to 240V, 50/60Hz
Output: DC24V 1.3A 60W
Overall Dimensions: 126×200×60mm (W(H)×D(V)×(H))
Weight: 1kg (approx.)

Cables:

DC Power Cable (Option): 2m,10m,20m (with 90°angle connector)
(Power Supply Unit -> Sensor Unit)
GND Cable: 3m×2

Environmental:

Operating Temperature: +10 ~ 35 °C
Operating Humidity: 30 ~ 85 % (Non-Condensing)
Operating Pressure: 70 ~ 106 kPa

Storage Temperature: -15 ~ 55 °C
Storage Humidity: 10 ~ 90 % (Non-Condensing)
Storage Pressure: 50 ~ 106 kPa

Image Format:

X-ray Conversion Layer:
Cesium Iodide (Csl) with Amorphous Silicon (a-Si) Photodiode
Active Area: 430(H)×439(V)mm (16.9×17.3 inch)
Pixel Matrix: 3008(H)×3072(V)
Pixel Pitch: 143 µm
Cycle Time: Shot to Shot 6sec.

Performance:

Limiting Resolution: 3.5 Lp/mm typ.
MTF (2.0 Lp/mm, 70 kVp, 1×1): 30 % Typ.
DQE (0), Quantum - Limited: > 70 %
A/D Conversion: 14 bit

Ratings:

Energy Range: 40~150 kVp
Maximum Entrance Dose (low Gain): 4 mR / frame

Interface:

Data Output:
16 bit Digital Output Ethernet (1000BASE-T)
Command Control: Ethernet (1000BASE-T)
X-ray Synchronization Control: External
Power Input: DC24V 2A (from Power Supply Unit)

Image Acquisition:

Mode: 3072 lines Full Scan mode
Frame rate (Frame/s): 1(approx)
Binning/Non-Binning: Binning
X-ray period (ms): Standard: 500
(Variable between 50 to 500)
Optional: 1000, 2300, 3200 o

COMES WITH EP-F001A POWER SUPPLY
1 YEAR WARRANTY

LOCATED IN OUR TAMPA , FLORIDA WAREHOUSE

This equipment is located in US