1318 - Eppendor 5415 C Centrifu

Listing description

•The Eppendorf Micro Centrifuge 5415 C is used for quickly separating precipitates and liquids of different specific densities.
•The standard rotor is a 45 Deg. angled rotor for 18 - 1.5mL Eppendorf Microcentrifuge Tubes with an 11 mm diameter. There are two special rotors for tubes with a smaller diameter:
•Tube diameter 8 mm (e.g. 500 uL and B-D Microtainer)
•38 Deg. angled rotor for 24 tubes. Tube diameter 6 mm (e.g. 400 uL and 250 uL)
•38 Deg. angled rotor for 30 tubes.
•The rotational speed is continuously adjustable from 1,000 to 14,000 rpm. (+/- 1 %)
•Spin times up to 30 min. can be set on the timer.
•Short centrifuging times can be regulated using the momentary button (LED flashes at 1-second intervals).
•Upon operating the momentary button, the centrifuge always accelerates to the max. possible rotaional speed of 14,000 rpm (independent of the setting of the speed control dial).
•Acceleration time: approx. 10 sec
•Deceleration time: approx 15 sec
•RCF of 16,000g in 10 Seconds
•Timer: 30 min

This equipment is located in CA