AGILENT / THERM 7500i ICP-MS /

Listing description

System includes: Agilent 7500i Inductively Coupled Plasma Mass Spectrometer (ICPMS) with Chiller, Agilent Integrated Introduction System, Rotary Vane Pump and Computer. Agilent 7500i ICP-MS

Robust high temperature plasma for low oxide interference and reliable operation in organic sample matrices. •
Extreme sensitivity: >500 Mcps/ppm Y with ShieldTorch and Micro flow nebulizer. • Unique nine orders dynamic range with high speed simultaneous detector.
Sample introduction system and interface designed to handle high matrix sample types including environmental, food, biomedical,petrochemical, and geological.

Agilent Integrated Introduction System
Technology designed, built and supported by Agilent, combines neatly with the ICP-MS mainframe and features fully integrated software.
The ISIS-DS loop is filled via a peristaltic pump - not a diaphragm vacuum pump so sample consumption is low (around 2 mL/min) and there is no vacuum pump and associated pump valve to wear and replace.
ISIS-DS can significantly improve sample throughput giving total run times of less than 1.5 min (depending on element list and sample type) which is 2-3 times faster than normal (continuous) sample introduction.
Thermo CFT-75 Chiller
Analog Temp Controller
Air Cooled
PD-1 Pump
External Cooling: Air Cooled
Pump type/Model: PD-1
Minimum Temperature: 5 ºC (41 ºF, 278.00 ºK)
Maximum Temperature: 35 ºC (95 ºF, 308 ºK)
Control Type: Analog Setpoint
Cooling Capacity: 2500 Watts
Temperature Stability: ±0.5°
Reservoir Volume: 6.8 Liters; 1.8 Gallons
Agilent DS 402 Rotary Vane Pump

Low 10-3 mbar operation
Low operating temperature
Good pumping efficiency and gas ballast in the low 10-2 mbar region
Dell Computer System

This equipment is located in US