AHP300 Transpor AHP300 Transpor

Listing description

Features and Benefits
Broad Featured Capability
Invasive and non-invasive support for infant (5 kg and up) to adult patients, with a flexible array of ventilation options including Pressure Control/Volume Control ventilation , SIMV/Assist Control spontaneous breath support, and stand-alone CPAP/BiLevel support.
Enhanced Ease of Use
The AHP300 offers value-added features for intra-hospital and inter-hospital transport.
Quick Start Ventilation - Featuring programmable presets, the AHP300 allows trained caregivers to rapidly recall up to 5 saved ventilation protocols.
Long Battery Life – Up to 7.5 hours on internal battery, with auxiliary battery capability for up to 21 hours of battery life.
Oxygen Conserve Mode – Allows the use of low pressure sources (oxygen concentrator, liquid oxygen, etc.) to extend available oxygen.
Multi-Environment Capability
For everyday transport or evacuation from extreme environments, the AHP300 has you covered. It features rugged shock and vibration resistance, and IPX22 water resistance.
Low Cost of Ownership
The preventative maintenance schedule is simple, using high quality inexpensive battery and repair parts to lower your long term cost of ownership compared to other ventilators.
Materials Included

AHP300 Ventilator Unit
Power Cord
Oxygen Hose
Ventilation Circuit
Carrying Strap
User Manual
Technical Specifications

Dimensions

Width: 13.3" (34 cm)
Depth: 5.3" (13 cm)
Height: 13.8" (35 cm)
Controls/Settings
Modes
(Pressure or Volume) A/CMV
(Pressure or Volume) SIMV
CPAP
Bi-Level Support (PS+CPAP) (can be programmed in custom mode)
NIV (non-invasive ventilation) available in all modes
5 Programmable Quick Start Presets
Tidal Volume: 40 to 2,000 ml
RR (Respiratory Rate): 0 or 5 to 60 b/min
I Time (Inspiratory Time): 0.5 to 2.0 sec
PEEP/CPAP: 0 to 25 cmH2O/0 to 25 mbar
PS (Pressure Support)**: 0 to 25 cmH2O / 0 to 25 mbar* (*PEEP + PS cannot exceed 25 cmH2O/mbar Operating Humidity 5 to 95% non-condensing)
Flow: 5 to 60 L/min (flows > 80 LPM in PS Mode, CPAP and demand flows)
Pressure Control (Target Pressure): 15 to 55 cmH2O / 15 to 55 mbar
Ptrig (Sensitivity): -5 to -1 cmH2O / -5 to -1 mbar
Manual Inflation: 2 second maximum
FiO2: .21 to 1.00 Maximum I Time: 2 seconds
Flow Wave Pattern: Square or descending** ** Based on mode selected
Auto Lock Function: ON / OFF
Remote Alarm Option: Normally Open/Closed
Monitored Parameters
Paw (Peak, Base)
Delivered Tidal Volume
Spontaneous Breath Count
Integrated Battery Level
External Battery Level - When Attached
Calculated Parameters
I:E Ratio
Flow rate
FiO2
Alarms
High Airway Pressure: 10 to 55 cmH2O/10 to 55 mbar
Low Airway Pressure: 5 to 15 cmH2O/5 to 15 mbar
Back-up Ventilation Alert: 20 second fixed, apnea ventilation mode
Low Source O2: Triggers at 40-37 psi
Low Source Air: Triggers at 40-37 psi
Device Alert: Malfunction alert Critical
Battery: Approx. 20 minutes of battery charge remains
Silence/Reset: 110 sec
Pneumatics
Gas Delivery System: Internal dual diaphragm
Air/Oxygen Mixer: Integrated
Oxygen Input: 41 to 87 psig oxygen
Power Requirements
AC Voltage: 110- 240 VAC, 50/60 Hz, max. 1A
DC Voltage: 11-15 VDC, max. 5A
Integrated Battery Parameters
Battery Composition: Sealed Lead Acid
Run time; 100% O2: 7.5 hours
Run time; 60% O2: 7.5 hours
Run time; 100% air (On Compressor): 7 hours
With External Battery Pack Parameters (MCV-AUXBAT)
Battery Composition: Sealed Lead Acid
Run time; 100% O2: 7.5 hours
Run time; 60% O2: 7.5 hours
Run time; 100% air (On Compressor): 7 hours
Environmental:
Shock: 100 G-Force
Vibration: To IEC 60068-2-6
Operating Temperature: 0° F to 122° F (-18° C to 50° C)
Storage Temperature: -40° F to 140° F (-40° C to 60° C)
Operating Humidity: 5 to 95% non-condensing
Water Ingress: IPx 22
Signal Connections
Remote Alarm: 1/4" phone jack to connect to nurse call or remote system
Specialty Features
Quick Start: Programmable presets to quickly recall pre-determined ventilation protocols
Custom Modes: 3 additional programmable custom modes that are available for quick recall
Oxygen Conserve: Allows the use of up to 10 LPM of oxygen at 3 to 40 psi through the DISS port or up to 10 LPM of oxygen at less than 10 psi through the low pressure barb fitting for use with oxygen concentrator.
Warranty Information

1-Year Warranty

This equipment is located in US