Used AL:MA Thermoform TF/440 For Sale

Asking Price
Contact Me for Price
Only 1 Available on the Marketplace!

Iain L.

Member since: October 2014

More listings by this seller

Contact the Seller
AL:MA Thermoform TF/440
Listing Reference:
Contact Me for Price
Dundee, Scotland, GB

Blister Packing Machine Mod. TF-440

Machine is in fantastic working condition and is maintained on a daily basis.
Viewing and full demonstration is available if required.
We are open to offers so please feel free to enquire for further information.

Outside dimensions (Welding Included) and inner dimensions of each single pack:

Outer: width 113mm, length 150mm,
Inner: width 103mm, length 140mm, depth 73mm max.
Packs/Cycle: 3, advance pitch 160mm

Characteristics of Film

Base web for the thermoforming of tray:
Rigid, type: PET, thickness: 300/500 microns,
Web width 440mm, inner diameter of roll 76mm, outside max. 400mm.

Top web material for sealing:
Type: PET with lacquer, thickness: 100/150 microns,
Web width 420mm, inner diameter of roll 76mm, outside max. 300mm

Basic Machine Construction

Stainless steel and anodized aluminium construction, electric and pneumatic equipment, film drive by stainless steel gripper chain, electronic control of advanced pitch, forming stations, sealing and cutting with relative mechanical raising units, check panel, PLC for the running cycle control and brushless motorisation.

Specific Equipment

- Base web and top web unwind units with pneumatic stop and end of reel detectors.
- 2 pre-heating stations for base web with 4 individual Teflon coated heating plates. Temperature of plates checked individually through PLC.
- Pneumatic lifting units for pre-heating, forming and sealing stations.
- 1 forming head with plugs for positive forming.
- 1 forming die with 3 cavities.
- 3 plugs built.
- Loading platform with adjustable height, space for automatic positioner for leaflet excluded, for the manual feeding of the product to be packed (L=1920mm)
- Automatic positioner for the insertion leaflet.
- 1 sealing head with 1 standard heating platen, with one corner not sealed for easy opening and knurled sealed area.
- 1 sealing die with 3 seat gaskets.
- Rack and pinion manual centring between the forming and the sealing stations.
- Total die cut station for external cutting.
- 1 die cut station for euro hole with 3 punches.
- Motorised waste film-winding unit.
- Out feed motorised conveyor belt.
- Centralised gathering of compressed air exhausts.
- No. 3 Sets of 3 additional forming plugs, with spacers and cooling plate.
- No. 1 Refrigeration chiller at closed circuit.

Security Systems

- Accident preventions.
- Security sensors according to CE rules.
- CE conformity certificate and CE mark.

General Technical Characteristics of the Thermoforming Packaging Machine

- Max depth of thermoforming 80mm.
- Height of loading platform 925mm.
- Electrical requirements 3 phase + neutral + earth, Hz50 380 Volt.
- Installed power, approx. 15/20Kw.
- Real consumption 50%
- Air consumption 1000/1200 L/m.
- Compressed air pressure 6 Ate.
- Water consumption 150 L/h
- Length of machine, approx. 9150 (8000+150)mm
- Width of machine, approx. 1100mm.
- Height of machine, approx. 2100mm.
- Weight of machine, approx. 3000Kg

Used equipment can sell very quickly. Contact the seller asap to discuss this AL:MA Thermoform TF/440.

Contact the Seller
Asking Price
Contact Me for Price
Only 1 Available on the Marketplace!

Iain L.

Member since: October 2014

More listings by this seller

Contact the Seller

Related Auction

Contact the Seller

Contact the Seller

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.