Bander CEHISA w Bander CEHISA w

Listing description

Bander CEHISA with preliminary milling SYSTEM-5PS

- Machines in stock
- After reconditioned
- State vg

The machine has a pre-milling which becomes a standard that enables high-quality finishing edges of the plates, especially when the laminate layer
_ * It is very thin. * _
This operation eliminates the disadvantages * * occurring when cutting discs such as:
lack of squareness, trace podcinaku, swollen from moisture edges, etc.
Preliminary cutting edge of the plate PF-7 with two high speed, counter units, equipped with diamond cutters
The machine is used for gluing edges of melamine, plastic PVC / ABS and veneer up to 3mm thickness and wooden strips up to 8 mm thick.

EQUIPMENT :

- PRE-MILLING
- SECTION ADHESIVE
- TEAM BALL chipping
- Trimming unit EXCESS EDGE
- TEAM rounding CORNER
- CYCLIN RADIAL
- POLISHING

- Glue container of warm-up time of 25 minutes total
- Combined station to enter the periphery of the rolls and strips
- Pre-cutting cutter rim having a thickness of 3 mm

- Unit 2 - pilkowy V-6 to accurately cutting the periphery of the front and back plates
- Trimming unit equipped with 2 high-revving
- Collecting excess veneer on straight and angle

- A set of cutters to rounding
- Zaoblania corners of the plate rim veneered PVC / ABS
- 2 edge scraping station after milling
- The edge polishing station after milling
- Total power 12.6 KW

- Edgeband thickness max 5 mm
- Edgeband height from 10 up to 55mm
- Plate length min .: 120mm
- Board width min .: 75mm
- The thickness of the periphery from 0.4 to 3 mm
- Feed speed: 9 to 14 m / min
- Air pressure: 6-7 bar
- Panel thickness from 8 to 60mm

- Electrical height adjustment

- Weight ok.2400kg

- Dimensions:

* Length - 6190mm
* Width - 1200mm
* Height - 1582mm
* Weight 1800 kg
* Demand for air extraction 1000m3 / h

The main advantages of the machine:

* Stable construction
* Reputable brand CEHISA - a leading manufacturer of edgebanders
* Recommendable
* For every professional
* Original paint - the machine is not painted

This equipment is located in PL