Used Bantam B212 For Sale

Asking Price
$5,895
Stock:
Only 2 Available on the Marketplace!
Seller:

Art L.

Member since: July 2011

More listings by this seller

Contact the Seller
Name:
Bantam B212
Listing Reference:
601642
Price:
$5,895
Location:
NJ, USA
Age:
Unknown
Description:

12 Ton 24'' Bed Bantam B212 NEW PRESS BRAKE, 12 Ton x 2' & MADE IN THE USA;Reference Number: 146929;New Atek Bantam 12 Ton x 2' Pneumatic Press Brake;Model: B212 MADE IN THE USA;SPECIFICATIONS;Bed Width: 2';Ram Height: 5-7/8";Max Back Gauge Depth: 18";(Note: Maximum back gauge depth is reduced by 2 inches when equipped with micro-adjustable;gauge option.);Max Speed @ Full Stroke: 30 SPM;Weight: 940 lbs;STANDARD FEATURES;Adjustable Stroke Depth Control is provided by the screw stop for precise;repeatability. Raise the adjustable bed and shorten the ram stroke to maximize;productivity while reducing air consumption and minimizing the pinch point for safer operation.;Accommodate a Wide Variety of Tooling...;Adjustable Die Space handles numerous tool sets and reduces or eliminates the;d pinch point. Per OSHA guidelines, a die space gap of 1/4" or less is not a pinch;point and provides the safest operation method. Loosen the bed and raise or;lower it with the large bed elevating screws. Leveling of bed to ram is easily;accomplished using this feature.;Select the Optimal Speed...;Ram Speed Control via an infinitely variable valve allows instant adjustment of air;d flow to the dual cylinders. A minimum setting creates a creep mode for setup, or;select any other position to safely match ram speed with your job.;Give the Operator Full Command...;Safety Hooded Foot Pedal controls all ram motion. Fully depress control pedal;d for down stroke. Slightly release pedal to stop advancing the ram. Completely;release pedal at any time and the counter-balanced ram automatically retracts to;the top of the stroke. For added safety, the ram retracts if air supply is removed.;The unique zero-backlash design with its +/- 0 position tolerance is more;accurate than any hydraulic press brake that uses switches, sensors, and valves;to stop ram motion.;Condition the Air Supply...;Modular FRL Unit is standard on all models to condition air supply to pneumatic;d components for long life. The unit consists of an adjustable filter/regulator module;with pressure gauge, adjustable flow lubricator module and a three-way lockable;shut-off valve. The valve is vented to relieve downstream pressure in the off;position per OSHA guidelines. Keyed padlock and lockout tag are included.;Select the Right Tonnage for the Job...;Variable Tonnage Control provided through the modular filter/regulator/lubricator;d unit delivers twelve or twenty-four tons of ram force to form up to 3/8" or 1/2" at;maximum pressure. Lower the pressure to suit the job, reduce air consumption;and preserve tooling;Use It Years Longer...;Atek's Press Brakes are recognized worldwide as proven performers giving more;d years of service in the field than any comparable unit. The rugged lever weldment;absorbs torque generated by off center loads. Bed deflection is less than industry;standards. From the smallest shop to the largest corporation, the Bantam name is;known for dependable productivity.;Run Without Interruption...;Our fully Pneumatic Press Brakes require minimal service. Designed for;d simplicity, there are few moving parts to wear out - no motor, clutch or brake;to maintain or replace.;Details That Count...;Every Atek Bantam is designed and built with quality and attention to details.;Ram guides are simple to adjust and provide years of service. All critical pivot;points are heat treated and equipped with grease fittings. Special bushing material;is engineered for high loads to support the rocking lever pivot shaft.;OPTIONAL EQUIPMENT: for pricing);Floor Stand;Digital Readout for standard rear adjust Y-Axis Ram Stroke Control;Front Adjust Y-Axis Ram Stroke Control;Front Adjust Y-Axis Ram Stroke Control w/DRO;Rear Adjust Pro-Gage Micrometer Back Gage, 0 - 4", Two units mounted on;common crossbar;Front Adjust Back Gage w/DRO;Smart-Gage CNC Back Gauge for 12 Ton Press Brake, 0 - 12";(1) Pro-Gage Micrometer Front gage w/Bed mount, rotary and vertical adjust;no bed t-rail;Bed T-Rail for Front Gauge of feet, price per foot plus $25 cutting charge);Production parts counter;Two Hand safety control w/front workpiece support table;Front Workpiece support table;Large Sheet Support;Segmented Safety Clamp Ram;Additional Tooling space side frames

Used equipment can sell very quickly. Contact the seller asap to discuss this Bantam B212.

Contact the Seller
Asking Price
$5,895
Stock:
Only 2 Available on the Marketplace!
Seller:

Art L.

Member since: July 2011

More listings by this seller

Contact the Seller

Related Auction

Contact the Seller

Contact the Seller

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.