BIESSE Rover 37 FTS

Listing description

2002 BIESSE Rover 37 FTS

5' x 12' Flat table design for "Nested Base" processing: Working cap.: "X" Axis is 137.8" (3,500 mm), "Y" axis is 72.8" (1,850 mm), "Z" axis stroke is 7.1" (180 mm).

Work Table:
Phenolic "MATRIX" grid vacuum table for FT "Nesting" or single part processing using (optional) pods or jigs; (2) side & (8) rear & (4) side pop-up pins for easy material location.

Positioning Speed:
"X" & "Y" axis 328 FPM (100 MPM), "Z" axis 98 FPM (30 MPM); "X" axis uses a helical rack & pinion system, "Y" & "Z" axes use precision ball screws, all axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system.

Boring Unit:
(1) 4 HP (3.3 kW) - 4,000 RPM motor: (14) independent vertical spindles, (7) in "X" axis & (7) in "Y" axis; (6) Horizontal spindles with (2+2) in "X" axis & (1+1) in "Y" axis.

Machining unit:
(1) 16.3 HP (12 kW) HSD electro-spindle router with HSK F63 adaptor, inverter driven 1,000 - 20,000 RPM with max. torque from 12,000 - 20,000 RPM; (1) 6-Position "Ride Along" Automatic tool changer for "on-the-fly" ATC.

Control
PC Front End with: Biesse "NC 1000 + WINDOWS "2000" operating system; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. Programs can be transferred via diskette or downloaded by wire; built-in 1,500 W air conditioner for constant temperature & dust-free environment..

Complete with:
(1) 40 HP (500 CFM) TRAVAINI vacuum pump; (1) 11 KVA Stabilized auto-transformer for voltages between 200 - 600 V; Automatic "forced" lubrication system for guides & ball screw; emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on; sound absorbing protective head enclosure with debris curtain around bottom edge.

F.O.B. Irwindale CA

Product comes “AS IS WHERE IS ” with all explicitly stated or pictured accessories. If you have a question about the product, please ask before you buy;
no returns. All products are believed to be in perfect working condition unless otherwise specified. Products do not include any accessories or cables unless they are listed in the description or picture.

TAXES or other Import Fees; the bidder/buyer[s] is solely responsible for these fees, documents and transportation if held at a customs office in the destination country. In the event that you have questions about shipping and product,
please contact us.

This equipment is located in US