Clausing A40RS

Listing description

30.3'' Swing 3HP Spindle Clausing A40RS DRILL PRESS;Reference Number: 148514;NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL;30.3" GEARED-HEAD, MECHANICAL CLUTCH, FLOOR;w/AUTOMATIC FEED REVERSING SYSTEM FOR TAPPING;MODEL: A40RS;SPECIFICATIONS;Spindle taper: 4MT;Quill diameter: 3.46";Spindle travel (drilling depth): 7.87";Main motor power: 3 HP;Coolant pump motor power:.1 HP;Number of speeds: 9;Number of automatic feeds: 4;Auto feed range: in/rev..0039/.0079/.0118/.0157;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 1.57";-Maximum drilling capacity in cast iron: 2.17";-Maximum tapping capacity in steel: 1.3";-Maximum tapping capacity in cast iron: 1.57";-Automatic feed reversing system for tapping;-Automatic feed and cut-off by mechanical clutch;-Hardened and ground high quality steel gears;-Speed plate and selecting levers on front of head;-Gear box lubrication by automatic pump;-Machine base with 2 T-slots, coolant tank and pump;-Large worktable with 3 T-slots;-Feed crank wheel for manual feed;-Front hand wheel for fine feed work;-Depth scale and adjustable depth stop;-Automatic tool ejector;-Work light;-Built-in low voltage electrical equipment in machine head;-Emergency STOP;-Drill guard with microswitch;DIMENSIONS;Height: 92.4";Base: length x width: 31.9" x 21.3";Base to spindle: 49.61";Spindle center to column: 15.16";Spindle to Table;Minimum: 5.51";Maximum: 30.71";Worktable: length x width: 18.9" x 22.1";Base height: 5.31";Column diameter: 7.09";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Separate Tank Coolant System;-Work Light--Magnetic Base;-Cross Table 19.6" x 9.8";-Cross Table 27.5" x 9.8";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Pitch Control Tapping w/Braking System*;-Master Guide Spindle w/Nuts*;-Master Guide Spindle w/Nuts Special Thread (inch etc.)*;-50% Lower Feed Range*;-Mechanical Spot Face Device*;-Pneumatic Counter Balance*;-Union for Multi-Spindle Head*;-Multi-Spindle Head Guide Rod*;-7.8" Column Riser*;-Motor, 1200 RPM*;-Motor, 3600 RPM*;-Motor, 900/1800 RPM*;-Motor, 1800/3600 RPM*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US