Clausing B50

Listing description

29'' Swing 4HP Spindle Clausing B50 DRILL PRESS;Reference Number: 148523;NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL;29" GEARED-HEAD, ELECTRICAL CLUTCH, FLOOR;MODEL: B50;SPECIFICATIONS;Spindle taper: 4MT;Quill diameter: 3.46";Spindle travel (drilling depth): 9.06";Main motor power: 4 HP;Coolant pump motor power:.1 HP;Number of speeds: 9;Number of automatic feeds: 6;Auto feed range: in/rev..0039/.0079/.0118/.0157/.0197/.0236;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 1.97";-Maximum drilling capacity in cast iron: 2.36";-Maximum tapping capacity in steel: 1.42";-Maximum tapping capacity in cast iron: 1.65";-Automatic feed and cut-off by electromagnetic clutch;-Hardened and ground high quality steel gears;-Speed plate and selecting levers on front of head;-Gear box lubrication by automatic pump;-Machine base with 2 T-slots, coolant tank and pump;-Large worktable with 3 T-slots;-Feed crank wheel for manual feed;-Front hand wheel for fine feed work;-Depth scale and adjustable depth stop;-Automatic tool ejector;-Work light;-Built-in low voltage electrical equipment in machine head;-Emergency STOP;-Drill guard with microswitch;DIMENSIONS;Height: 97.4";Base: length x width: 33.9" x 21.7";Base to spindle: 51.18";Spindle center to column: 14.57";Spindle to Table;Minimum: 5.91";Maximum: 30.71";Worktable: length x width: 20.5" x 24.4";Base height: 5.71";Column diameter: 7.87";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Separate Tank Coolant System;-Work Light--Magnetic Base;-Cross Table 19.6" x 9.8";-Cross Table 27.5" x 9.8";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Pitch Control Tapping w/Braking System*;-Master Guide Spindle w/Nuts*;-Master Guide Spindle w/Nuts Special Thread (inch etc.)*;-Pneumatic Counter Balance w/Rapid Approach & Retract*;-50% Lower Feed Range*;-Mechanical Spot Face Device*;-Pneumatic Counter Balance*;-Union for Multi-Spindle Head*;-Multi-Spindle Head Guide Rod*;-Column Riser (8")*;-Motor, 1200 RPM*;-Motor, 3600 RPM*;-Motor, 900/1800 RPM*;-Motor, 1800/3600 RPM*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US