Clausing B70RS

Listing description

31.5'' Swing 7.5HP Spindle Clausing B70RS DRILL PRESS;Reference Number: 148528;NEW CLAUSING/IBARMIA GEARED-DRIVE ROUND-COLUMN DRILL;31.5" GEARED-HEAD, ELECTRICAL CLUTCH, FLOOR;w/AUTOMATIC FEED REVERSING SYSTEM FOR TAPPING;MODEL: B70RS;SPECIFICATIONS;Spindle taper: 5MT;Quill diameter: 3.54";Spindle travel (drilling depth): 10.24";Main motor power: 7.5 HP;Coolant pump motor power:.12 HP;Number of speeds: 12;Number of automatic feeds: 6;Auto feed range: in/rev..0039/.0079/.0118/.0157/.0197/.0236;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 2.75";-Maximum drilling capacity in cast iron: 3.15";-Maximum tapping capacity in steel: 2";-Maximum tapping capacity in cast iron: 2.36";-Automatic feed reversing system for tapping;-Automatic feed and cut-off by electromagnetic clutch;-Hardened and ground high quality steel gears;-Speed plate and selecting levers on front of head;-Gear box lubrication by automatic pump;-Machine base with 2 T-slots, coolant tank and pump;-Large worktable with 3 T-slots;-Feed crank wheel for manual feed;-Front hand wheel for fine feed work;-Depth scale and adjustable depth stop;-Automatic tool ejector;-Work light;-Built-in low voltage electrical equipment in machine head;-Emergency STOP;-Drill guard with microswitch;DIMENSIONS;Height: 103.9";Base: length x width: 35.8" x 23.2";Base to spindle: 49.21";Spindle center to column: 15.75";Spindle to Table;Minimum: 3.15";Maximum: 25.98";Worktable: length x width: 23.6" x 27.6";Base height: 6.3";Column diameter: 8.66";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Separate Tank Coolant System;-Work Light--Magnetic Base;-Cross Table 19.6" x 9.8";-Cross Table 27.5" x 9.8";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Pitch Control Tapping w/Braking System*;-Master Guide Spindle w/Nuts*;-Master Guide Spindle w/Nuts Special Thread (inch etc.)*;-Pneumatic Counter Balance w/Rapid Approach & Retract*;-50% Lower Feed Range*;-Mechanical Spot Face Device*;-Pneumatic Counter Balance*;-Union for Multi-Spindle Head*;-Multi-Spindle Head Guide Rod*;-Column Riser (8")*;-Motor, 1200 RPM*;-Motor, 3600 RPM*;-Motor, 900/1800 RPM*;-Motor, 1800/3600 RPM*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US