Clausing BF35

Listing description

2HP Spindle Clausing BF35 DRILL PRESS;Reference Number: 148759;NEW CLAUSING/IBARMIA PRISMATIC COLUMN DRILL;MILL/DRILL, GEARED-HEAD, 30 TAPER;MODEL: BF35;SPECIFICATIONS;Spindle taper: ISO-30;Optional spindle taper (on request): 4MT;Quill diameter: 2.95";Spindle travel (drilling depth): 7.87";Main motor power: 1.5/2 HP;Coolant pump motor power:.12 HP;Head geared-motor power:.1 HP;Number of speeds: 18;Number of automatic feeds: 3;Auto feed range: in/rev..0039/.0079/.0118;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 1.38";-Maximum drilling capacity in cast iron: 1.57";-Maximum milling capacity in steel: 1.80";-Maximum milling capacity in cast iron: 3.20";-Maximum tapping capacity in steel: 1.18";-Maximum tapping capacity in cast iron: 1.30";-18 spindle speeds;-Adjustable vertical position of head by geared-motor;-Head rotates 45 degrees left or right of center;-Large worktable with 3 T-slots;-Hardened and ground high quality steel gears;-Gear box lubrication by automatic pump;-Guide ways lubricated by manual pump;-Speed plate and selecting levers on front of head;-High/low speed range selector;-Coolant tank and pump in machine base;-Co-ordinate cross slide table;-Automatic feed and cut-off by electromagnetic clutch;-Work light;-Front hand wheel for fine feed work;-Depth scale and adjustable depth stop;-Built-in low voltage electrical equipment in column rear;-Emergency STOP;-Spindle turn selection switch;-Drill guard with microswitch;DIMENSIONS;Height: 81.9";Overall length: 57.1";Spindle to Table;Minimum: 0";Maximum: 23.23";Spindle center to column: 15.08";Maximum head height: 94.5";Worktable: WxHxL: 14.17" x 35.43" x 47.24";Base width: 29.53";Overall width: 61.81";X travel: 27.56";Y travel: 14.17";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Cross Table 22.4" x 10.2";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Pitch Controlled Tapping*;-Pitch Controlled Tapping w/Braking System*;-Master Guide Spindle w/Nut Set*;-Master Guide Spindle w/Nut Set & Special Thread (inches etc.)*;-Column Enlargement*;-Column Riser*;-Motorized Gearbox Feed System in X*;-Motorized Gearbox Feed System in Y*;-Servo Feed X Axis*;-Servo Feed Y Axis*;-Digital Readout System (X Axis)*;-Digital Readout System (X, Y Axis)*;-Digital Readout System (X, Y, Z Axis)*;-ISO 30 Spindle*;-ISO 40 Spindle*;-Quick Change Nut for ISO-30*;-Automatic Tool Quick Change for ISO Spindle*;-Safety Drill Guard w/Microswitch for Mutli-Spindle*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US