Clausing BP50

Listing description

37.4'' Swing 5.5HP Spindle Clausing BP50 DRILL PRESS;Reference Number: 148540;NEW CLAUSING/IBARMIA PRISMATIC COLUMN DRILL;37.4" GEARED-HEAD, ELECTRICAL CLUTCH;MODEL: BP50;SPECIFICATIONS;Spindle taper: 4MT;Quill diameter: 3.46";Spindle travel (drilling depth): 9.06";Main motor power: 5.5 HP;Coolant pump motor power:.12 HP;Head geared-motor power: 1.5 HP;Number of speeds: 9;Number of automatic feeds: 6;Auto feed range: in/rev..0039/.0079/.0118/.0157/.0197/.0236;STANDARD FEATURES & EQUIPMENT;-Maximum drilling capacity in steel: 1.97";-Maximum drilling capacity in cast iron: 2.36";-Maximum tapping capacity in steel: 1.65";-Maximum tapping capacity in cast iron: 1.97";-Adjustable vertical position of head by geared-motor;-Large worktable with 3 T-slots;-Hardened and ground high quality steel gears;-Gear box lubrication by automatic pump;-Guide ways lubricated by manual pump;-Speed plate and selecting levers on front of head;-Coolant tank and pump in machine base;-Automatic feed and cut-off by electromagnetic clutch;-Work light;-Front hand wheel for fine feed work;-Depth scale and adjustable depth stop;-Built-in low voltage electrical equipment in column rear;-Emergency STOP;-Automatic tool ejector;-Forward and reverse turn push buttons;-Drill guard with microswitch;DIMENSIONS;Height: 97.2";Base length: 55.9";Spindle to Table;Minimum: 11.02";Maximum: 39.4";Spindle center to column: 18.7";Maximum head height: 108.3";Worktable width: 23.62";Table height: 27.56";Worktable length: 27.56";Overall width: 39.37";OPTIONAL EQUIPMENT (CALL FOR PRICING);-Separate Tank Coolant System;-Work Light--Magnetic Base;-Cross Table 27.5" x 14";-Cycle Start Foot Pedal;-Foot Pedal For Reversing;-Pitch Control Tapping w/Braking System*;-Pitch Control w/Pneumatic Rapid Approach*;-Master Guide Spindle w/Nut Set*;-Master Guide Spindle w/Nut Set & Special Thread (inches etc.)*;-Pneumatic Counter Balance w/Rapid Approach & Retract*;-Pneumatic Counter Balance w/Rapid Approach & Retract (2 cylinders)*;-Pneumatic Counter Balance;-Union for Multi-Spindle Head*;-Multi-Spindle Guide Rod*;-Multi-Spindle Guide Rod (with 2 axis)*;-Column Riser*;-Column Enlargement*;-Coolant Hose for Multi-Spindle Head*;-ISO 40 Spindle w/Quick Change Nut*;-Motor, 1200 RPM*;-Motor, 3600 RPM*;-Motor, 900/1800 RPM*;-Motor, 1800/3600 RPM*;*Factory Installed;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US