Clausing-Metosa C1330

Listing description

13'' Swing 30'' Centers Clausing-Metosa C1330 ENGINE LATHE, D1-5 with 1.65'' spindle bore, 9 spindle speeds;Reference Number: 149387;NEW CLAUSING/METOSA LATHE;13" x 30" GAP BED;MODEL: C1330;SPECIFICATIONS;CAPACITY;Swing over bed: 13.2";Center height: 6.5";Swing over carriage: 12.20";Swing over cross slide: 6.89";Bed width: 10";HEADSTOCK;Spindle bore: 1.65";Spindle nose: D1-5;Spindle taper: 4MT;No. of speeds: 9;Spindle speed range: 60-2000 rpm;THREAD AND FEED BOX;No. of longitudinal feeds: 44;Range (inches):.0018-.026;No. of cross feeds: 44;Range (inches):.0005-.0076;No. of metric threads: 44;Range (mm): 0.5-7.5;No. of inch threads: 44;Range (t.p.i.): 4-60;No. of modular threads: 44;Range: 0.25-3.75;No. of diametral pitch threads: 44;Range: 8-120;Leadscrew dia./TPI 1.26"/4;SLIDE AND CARRIAGE;Cross slide travel: 9.65";Top slide travel: 4.72";Max. tool size: 5/8" x 5/8";TAILSTOCK;Tailstock ram diameter: 1.9";Tailstock ram travel: 5.51";Tailstock taper: 3MT;MOTORS;Spindle motor: 3 hp;Pump motor: 3/4 hp;DIMENSIONS;Height x Width x Length: 50.5" x 37.5" x 85.4";Center distance: 30" Gap Bed;Weight: 2250 lbs.;STANDARD FEATURES;HEADSTOCK & CONTROL PANEL: The 9 speed heavy-duty headstock is fully geared. All gears are hardened and;ground and run in a continual bath of oil. The main spindle is made of forged, quenched and tempered steel, with a case;hardened spindle nose and mounted on precision taper roller bearings. The control panel is designed for operator convenience;and efficiency.;MICRO CARRIAGE STOP: The micro Carriage Stop is standard on the 13" lathe.;4-POSITION BED STOP: The 4-Position Bed Stop allows fast and accurate turning of multiple lengths.;BED & BEDWAYS: The extra wide 10" bed is scientifically designed and constructed of stabilized cast iron with bedways;hardened and ground to a hardness of 42 to 47 Rc. The bed is designed with tapered cross braces for fast and easy chip;removal. The bed is mounted on a rigid, fabricated steel base that is specially engineered to absorb vibration and ensure smooth;accurate operation.;TAILSTOCK: The tailstock has an extra heavy-duty casting for maximum rigidity and is equipped with a 1.9" ram with 3MT;taper. The tailstock ram is marked with a graduated scale and the handwheel ring is indexed for accurate ram positioning.;CARRIAGE & APRON: The carriage and apron have easy to operate controls. The easy-to-read dual inch and metric;dials, and a quick change tool post is standard equipment of the 13" lathe.;STANDARD EQUIPMENT;- Dual Inch/ Metric Dials;-Dead Center;-Q.C. Tool Post with 4 straight holders;-Steady Rest (1/2"- 4 1/2");-Micro Carriage Stop;-4-Position Bed Stop;-Coolant System;-One-Shot Lubrication;-Interlocking Chuck Guard;-Splash Guard;-Leadscrew Cover;-Thread Dial Indicator;-Drive Plate;-Lathe Lamp;-T-Slotted Top Slide;-Electro-Magnetic Brake;-Chip Pan;-Chip Guard;-Tool Box and Manual;OPTIONAL EQUIPMENT (CALL FOR PRICING);-12" Face Plate;-Follower Rest;-Rear Tool Post;-Steady Rest w/Rollers 7" to 11.8" Capacity;-Extra Q/C Tool Post w/4 Holders;-"V" Tool Holder 16MM;-#2MT Tool Holder;-Straight Tool Holder 21MM;-Aloris Q/C Tool Post w/4 Holders;-Taper Attachment;-Roller Fingers;-Extra Dual Inch/ Metric Dials;-Extra Micro Carriage Bed Stop;-4 Way Tool Post;-Extra Steady Rest;-Extra 4 Position Bed Stop;-Extra Chuck Guard;-Mirco Switch for End Train Door;-Micro Switch for Chuck Guard;-Front Hand Wheel 5C Collet Chuck PBA;-Live Center;WARRANTY;Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not;cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.;**Due to continual improvements, prices and specifications subject to change without notice**

This equipment is located in US