-
Machinery
Choose from 20,437 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Doosan DHC-400
Control: Fanuc 21iMB
Condition: Good
Pallet:
Pallet Size (2 Pallets): 15.75" x 15.75"
Pallet Indexing: 1 degree
Maximum Load On Pallet: 880 pounds
Maximum Part Swing x Height: 23.6" x 31.5"
T-slot width: (4) x .708"
Changing method: Rotary shuttle
Pallet change time: 7.5 seconds
Travels:
X-Axis Travel: 23.6"
Y-Axis Travel: 22.0"
Z-Axis Travel: 22.2"
Maximum Part Swing x Height: 23.6" x 31.5"
Spindle:
Max. Spindle Speed (RPM): 8,000 RPM
Spindle Taper: CAT 40
Main Motor (HP - 15 min): 25 HP
Spindle nose to pallet center: 5.9" - 28.1"
Spindle center to pallet top: 1.97" - 24.0"
Spindle torque (15 min ): 118 ft-lbs.
Tool Changer:
Tool Changer Positions: 40 ATC
Max. Tool Diameter: 3.3"
with empty adjacent pockets: 5.51"
Max. Tool Length: 11.81"
Max. Tool Weight: 22 lbs.
Tool change time (tool to tool): 1.5 seconds
Tool change time (chip to chip): 4 seconds
Motion:
X and Z axis rapid traverse rate: 1,575 IPM
Y axis rapid traverse rate: 1,575 IPM
Cutting Feed rate: . 04 to 787 IPM
Least command increment: . 0001"
X and Z axis servo motor: 5.3 Hp
Y axis servo motor: 9.3 Hp
X, Y and Z axis ball screw diameter: 1.57"
Positioning accuracy (full stroke): +/- .00020"
Repeatability: +/- .00008"
1 Degree B-Axis Positioning accuracy: +/- 3 Seconds
1 Degree B-Axis Repeatability: +/- 1 Seconds
General:
Machine Height: 111"
Floor Space Required (W x D): 88" x 207"
Machine Weight: 22,330 lbs.
Power Required: 67 KVA-180 A, 220v
: 205 - 235 V / 3 Ph
Equipped With:
Fanuc 21iMB Control
This equipment is located in US
Manufacturer | Doosan |
Model | DHC-400 |
Year | - |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Machining Centre |
ID | P80906039 |
Client type | Machinery dealer |
On Kitmondo since | 2008 |
Number of listings | 70 |
Country | USA |
Employees | 1 - 10 |
Established | 2001 |
Last activity | March 15, 2024 |