FELDER FORMAT - FELDER FORMAT -

Listing description

Bander with preliminary milling
FELDER FORMAT - 4 - Perfect 80

- Machines in stock
- After reconditioned
- Year 2006
- The machine is not painted - original paint

EQUIPPED WITH POWER:

- Milling SKIRT UP AND DOWN - engine with a power of 0.68 kW
- Corner rounding (CAROUSEL)
- Scraping R 2 - connected mechanically
- CYCLIN ADHESIVE pneumatically
- Polishing unit
- PRE-MILLING - motor power 1.1 kW

- Lamp infrared heating panels
- Tank adhesive 3kg, quick replacement

- Pressure unit 3 rolls, 1 driven
- End trimming unit 2 balls 0,5kW
- Pneumatic tilt 15 degrees clipping unit

- Component spray unit before entering the polisher
- Aggregate milling rim set of desktop 4 positions

ELECTRICAL EQUIPMENT:

- Supply voltage 3 x 400 V
- The frequency of 50 Hz
- Installed power 16.4 KW
- Operating the machine with a system of touch-screen color display

Working dimensions:

- Min. Workpiece width 60 mm
- Min. Length 140 mm workpieces
- The thickness of 10-55 mm, laminated element
- Stickers obrzezowymi tapes from the roll with a thickness of 0.4-3 mm
- Veneer and solid wood strips 8 mm thick (10 mm)

UNITS:

- Bringing the peripheral tape roll with the support plate Ø 800 mm, for PVC / ABS / veneered wood edges

- Aggregate leveling mats, 2 controlled depth milling units, 12 000 rev. / Min., 1.5 hp (1.1 kW), adjustable depth of cut to max. 1.5 mm, the cutter to align with diamond blades Ø 60 x 56 mm

- Guillotine shears for cutting coiled material to a thickness of 3 mm

- Aggregate adhesive to glue EVA granules, Teflon coated glue pot with synchronized rolls for application and quick-change system 3 kg

- Pneumatic clamping unit 1 drive roller and 2 conical pressure rollers

- The deck, 2 engines, 12,000 rev. / Min. 0.68 hp (0.5 kW), HW-saw blade Z 24, Ø 100 x ø 20 x 3.2 mm, tilt angle of 0 ° -15 °

- Milling unit for straight and round, two motors, 12000 rpm / min, 0.93 hp (0.68 kW), a tilting angle of 0 ° -15 ° with the radius R = 3 mm

- Unit for processing corners, 12,000 rev. / Min, controlled by CNC for machining workpieces corners, 0.3 hp (0.22 kW)

- Aggregate cyklinujacy, mechanically activated for the radius R = 2 mm

- Heating unit, two hot air blowers 20-600 ° C

- Buffing unit, 2 engines, 1 400 rev / min., 90, tilting

- Equipped with cutters of radius R = 2 mm

This equipment is located in PL