FU 150

Listing description

Travels
Total longitudinal (X)

36’
1000 mm – 40” from the total X travel is for head magazine
Cross (Z)

59
Vertical (Y)

98.42
Feeds
Working feed in X, Y, axis per min.

0.04-787
Working feed in Z, axis per min.

0.04-630
Maximum trust in linear axes

4400 lbs.

VK – Interchangeable Spindle Milling Head
Continously controlled in two CNC axes
Automatic tool clamping
Spindle taper

CAT50
Speed range

20 – 4000 r.p.m.
Max. spindle torque

737 ft•lb
Motor output

40.8 hp
Coolant through the tool FORM B
Head turning around headstock axis

± 180°
Head turning around axis perpendicular to headstock axis

+ 30°, - 180°
Swivel speed around headstock axis

1 – 1800°/min
Swivel speed around axis perpendicular to headstock axis

1 – 5400°/min
Max. torque around headstock axis/ axis perpendicular to

headstock axis

1842/1769 ft•lb

“VO” –
Interchangeable spindle Milling Head
controlled in two axis
Taper in spindle

CAT 50
Automatic tools clamping

Spindle speed range

20 – 4000 r.p.m.
Maximum spindle torque

921 ft•lb
Output of main motor

40.8 hp
Cooling through the spindle type

FORM B acc. DIN 69871-B standard
Lubrication of the mill. head

Automatically by
grease
Single spindle head is automatic adjustable to horizontal or vertical position,
continously swivel around the vertical axis of the headstock axis in range of +/- 180° with
possibility of indexing by 1°. The spindle is also adjustable to any position by 2.5°.

“VA1” - Interchangeable horizontal spindle Milling Head

Taper in spindle

CAT 50
Automatic tools clamping

Spindle speed range

20 – 4.000 r.p.m.
Maximum spindle torque

1474 ft•lb
Output of main motor

40.8 hp
Cooling through the spindle type

FORM B acc. DIN 69871-B standard
Lubrication of the mill. head

Automatically by
grease

Milling heads magazine
Vertical type for storing the milling heads
The heads are automatically pick up by the headstock from the magazine

Rotary table, model CES 2000 x 2500
Working surface

78 x 98
Travel in linear axis

88.58
“T” slots - number

9

- pitch

7.87

- size (width)

1.1
Central table load

25 tons55,116 lbs.
Excentric 750 mm of the centre

10 tons22046 lbs.
Continously rotation per min.

1-720°
Total table turning cycle 360°

30 seconds

Automatic tool changer - chain type - with tool magazine
Number of tools

40
Tool shank

CAT50
Max. tool weight

55 lb.
Max. tool length

13.39
Max. tool diameter (adjacent)

5.12
Max. tool diameter (non-adjacent)

9.84
Max. weight of all tools in full tool magazine

1322 lb.
Weight of the tool changer -R40 without tools

3748 lb.

Cooling attachment
Coolant pressure

72.5 p.s.i.
Pump output per min

13 gal.
Coolant pressure for cooling through spindle

290 p.s.i.
Pump output per min

8 gal.

Cast iron clamping plate in size 6400x1880x400mm(1pc.)
- number of T slots

6
- pitch of T slots

12.40
- Width of T slots

1.10
The clamping plate will be placed along the longotudinal traverse of X axis

Cast iron clamping plate in size 2000x2000x400mm(1pc.)
- number of T slots

6
- pitch of T slots

12.40
- Width of T slots

1.10
The clamping plate will be placed across the longitudinal clamping plate

Tough probe - radio transmission type

M+H PS 20.00 MULTI

NOTE:
The FU 150 is a floor type Horizontal Boring and Milling Machine of modular design
which can be equipped with various types of milling heads, tables and tool magazines
with tool changer, depending on the customer's requirements. Machine with ATC is
designated as FU Q 150.

This equipment is located in US