Ganesh Cyclone CY32

Listing description

Contact us for more pictures of this machine.

Price:
$60,000
Location:
MD
Machine Type:
Swiss Lathe
Year:
2011
Manufacturer:
Ganesh
Model:
Cyclone CY32
Control:
Mitsubishi/Ganesh
Condition:

Excellent
Under Power: No

AXIS TRAVELS:

CNC Controlled Axis: 4 (X,Y,Z,&C)

X-Axis Travel (Vertical Tool): 7.5”

Y-Axis Travel (Cross Tool): 11.4”

Z-Axis Travel (Sliding Headstock): 6.5”

C-Axis Travel (Rotational Axis): 360,000 radial pos.

SPINDLE:

Spindle Bore (Usable bar diameter): 1.25”

Spindle Speed Range: 100-6,000 RPM

Spindle Horsepower: 5-HP

Spindle Center Height: 38”

Spindle Collet Type: Traub A-32

STATIC TOOLS:

Number and size of turning tools: 6 Tool Stations of ½”

Number of Internal Static Tools (bushings/collets): 5 ID tool stations

I.D. Tool Bores (Round Shank): 25mm bore

LIVE TOOLS:

Number of cross working driven tools: 4

Number of axial (end working) live tools: 3

Size of driven tools (round shank): 1/16” – ½”

Rigid Tapping with Driven Tools: YES

Driven Tool programmable range: 0-6,000 RPM stepless

Driven Tool HP: 1.0 HP

AXIS DRIVES:

Rapid Travers Rate – X,Y,&Z axis: 708 ipm

Maximum federate for thread cutting: 236 ipm

Minimum Programmable Input: 0.000039”

C-Axis Resolution: 0.001 degree

Brushless AC Servo Motor Drive (X / Y & Z): 1.5 HP / .75 HP

Ballscrew diameter: 25 mm

REQUIREMENTS:

Connected Load Power Consumption: 16 KVA

Connected Load Amperage: 42 amps

Connected Load Input Voltage Required: 208-240 vac

Pneumatic Requirements: 80 – 90 psi @ 1 cfm

Coolant Pump Motor/ Tank Capacity: ¾ HP / 25 gallon tank

Automatic Metered Lubrication: 3-6cc/15-minute

DIMENSIONS:

Floor Space – L X W: 83” X 52”

Machine Height: 75”

Machine Net Weight: 5,292 lbs

Equipped With:

Mitsubishi / Ganesh 4-Axis Control

Rigid Tapping on Main Spindle

Double-nut NSK ballscrews

Mist buster 500

Edge technologies Patriot 338, 8Ft. bar feeder

Small tools box

Phase perfect 70Amp phase converter

Line input transformer

7/8 Traub main chuck collet now

21 live tool collets of various sizes

15 static tool holders

1 Ntk, and 3 Iscar cutting tools with 10 inserts’ ea.

30 new assorted carbide, mills, drills, and solid cutters

25 gallons assorted machine fluids, Mobil, Blaser

Comments:

Used for less than 800 parts

Uses oil-based coolant (standard pressure)

This equipment is located in US