Idx EP-9/4Si

Listing description

Idx EP-9/4Si (EP94Si, EP 9 4Si, EP/9/4Si, ep-9/4si) 4 x ENDURA-HL9 Batteries, 1 x VL-4Si Simultaneous Charger with Intelligent Display;E-HL9;87Wh Li-ion V-Mount High Load Battery with PowerLink & Digi-View;Our exclusive PowerLink feature connects two E-HL9 batteries for a total power capacity of 174Wh. The 6-step 5 LED power status display gives an accurate reading of capacity in 20% increments plus the last 10%.. The E-HL9 supports Digi-View for reading battery levels in many of today’s camera viewfinders. Battery Management System (BMS) can be used for enhanced diagnostics and a comprehensive review of the battery’s history of use. E-HL9 Power Status is an accurate display of the E-HL9’s remaining power. Visually and instantly indentified at any time or shown in the camera viewfinder via Digi-View.;FEATURES;With a continuous draw of up to 10 Amps, the E-HL9 has an impressive capacity using highly durable cell technology.;High-load capacity results in 50% higher discharge rate for this series.;Advanced low temperature discharge characteristics prohibit a voltage drop off down to –4 degrees Fahrenheit in extreme environment conditions.;Longer overall lifecycle—operators can expect about 10% longer battery viability when the 500-cycle level is reached.;PowerLink technology allows two E-HL9 batteries to be docked together, doubling capacity up to 176Wh for longer run times and high power needs.;Digi-View gives the camera operator an accurate display of the E-HL9’s remaining capacity, shown via the camera’s viewfinder.;5 Power Status LEDs are located on the side of the E-HL9 for a quick and accurate check of remaining capacity, shown in increments of 20%.;BMS is a unique software package that enables users to monitor the history and condition of their batteries to increase their life span. BMS gathers battery data and provides PC access to a comprehensive database, invaluable when managing large fleets of ELITE, E-10 and E-HL9 batteries.;Battery circuit protection ensures the E-HL9 is fully protected against common causes of battery misuse, guarding against over charge, over discharge, over current and exposure to high temperatures.;Most environmentally friendly and safest battery in its classification.;Weighing only 1.63 lbs., the E-HL9 is compact and durable, ideal for regular use and transportation to and from location.;Attaching E-HL9 batteries to cameras without a standard V-Mount connection is possible through the use of P-V2 and P-VS2 adaptor plates, available separately from IDX and can be fully recharged using an ENDURA sequential or simultaneous charger.;Please note that IDX measures the capacity of Lithium Ion batteries as minimum capacity.;VL-2Plus;2-Channel Sequential Quick Charger with AC Power Supply Adaptor (60W DC @ 13.8V);The lightweight and durable VL-2PLUS delivers sequential 2-channel charging with unrivalled high speed and reliability, with the advantage of an integrated 60W power supply. Like all of our VL Series, the VL-2PLUS is a multi-chemistry charger for both Li-ion and Ni-Cad battery types.;FEATURES;Sequential 2-channel charging in either position. The VL-2PLUS will charge the first battery connected to either VMount channel, automatically switching to charge the second battery after the first is fully charged.;Integrated 60W DC power supply provides 60W XLR output for the camera, lighting and ancillary broadcast devices.;VL-2PLUS compatible batteries: All ENDURA V-Mount Li-ion batteries, and all NP Li-ion/Ni-CD batteries from IDX can be charged with an A-E2NP adaptor, available separately.;Internal safety features protect both the battery and charger from serious damage should faulty or misused batteries be placed on charge. The VL-2PLUS will automatically stop charging should any battery reach an over voltage condition.;Lightweight, high impact polycarbonate enclosure weighs a total of just 2 lbs., and features a recessed power switch and integrated carry handle.;Universal AC input voltage for worldwide operation.

This equipment is located in GB