Used Morrison 3 For Sale

Asking Price
$89,000
Stock:
Only 2 Available on the Marketplace!
Seller:

Art L.

Member since: July 2011

More listings by this seller

Make an Offer Ask the Seller a Question
Name:
Morrison 3
Listing Reference:
602163
Price:
$89,000
Location:
NJ, USA
Age:
Unknown
Description:

3'' Width 14'' Stroke Morrison 3 KEYSEATER, Brand New, 20 HP, Hydraulic;Reference Number: 146454;Brand New D.C. Morrison 3" Keyseater - IN STOCK!!!;The newly redesigned Morrison 3" Keyseater has been;physically modified and is more rigid than ever! The back;support bracket is twice the length of the older models;enabling more accurate keyways in various material.;The overhead support is now easily raised and lowered by;hydraulics with the push of a button. The programming is;now extremely user friendly with the use of a programmable;logic controller and human machine interface. (HMI);As in the past,the Morrison Keyseater does not require to;be positoned in a pit, and needs no bushings to center the;keyways. Cuts from 1\8" to 3" wide and 14" high.;AUTOMATIC FEED: (.001"through.006") eliminates pushing a;feed bar, eliminates the human error of feeding too much;or too little. The automatic feed insures accuracy and;enables the operator to get ready for the nextset-up.;Automatic Stop: automatically cuts off the feed for any;given depth and this also frees the operator for other;duties.;Automatic Relief: backs the work away from the cutter on;the up stroke eliminating drag and insuring a clean;keyseat.;Quick Set-Up: is one of the most important features. The;operator has all control handles built into the machine;and to change from one piece to another is very simple;and requires the least amount of time. Also different;cutter bits are interchangeable. The cutter bar does not;need to be changed in order to cut different size;keyseats.;Single Tooth Cutters: are not only for accuracy but;eliminate time and trouble in sharpening. All cutters are;of the finest HighSpeed Tool Steel.;Adjustable Stroke: The stroke is infinitely adjustable.;This is very desirable when slower cutting speeds are;required.;Automatic Centering: centers up the work quickly and;easily. lt can be set for multiple jobs of two or more;pieces, automatically centering the next work piece.;Automatic Lubrication: feeds oil to all necessary moving;parts by the means of a "one shot" system convenient for;the operator.;Uses No Bushings: and this feature not only simplifies the;operation but no extra equipment needs to be ordered to;cut a keyseating any size bore. The cutter bar is;supported close to the actual cut by a quick acting;adjustable cutter bar support, both above and below the;work.;Hydraulic System: with the hydraulic set on maximum;pressure cylinder size is 3-1/4" diameter. The machine;will develop approximately 8 tons of cutting pressure at;cutting edge of cutter.;SPECIFICATIONS;Cut Keyways: 1-1/8" - 3";Maximum length of cut: 14";Number of feeds (6):.001" thru.006";Distance from 2" cutter to column: 34-1/2";Table Size: 50" x 36-1/2";Table Height from floor: 41-1/2";Floor space hydraulic system: 41" x 43";Floor space keyseater: 84" x 36";Motor: 20hp 220 / 440 volt;STANDARD;Start, Stop, magnetic starter with over and under voltage;protection, variable speeds, automatic luberication;automatic table feed, hydraulic unit, centering vee and 2";cutter bar.;*** CALL FOR PRICING FOR ADDITIONAL CUTTERS AND CUTTER BAR;ADAPTOR (for small cuts).

Used equipment can sell very quickly. Contact the seller asap to discuss this Morrison 3.

Contact the Seller
Asking Price
$89,000
Stock:
Only 2 Available on the Marketplace!
Seller:

Art L.

Member since: July 2011

More listings by this seller

Contact the Seller
Contact the Seller

Contact the Seller

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.