Moulder WEINIG Moulder WEINIG

Listing description

Moulder WEINIG POWERMAT 1000 years pr. 2011 exhibition, a year into use in 2013

- Control touch screen WEINIG system Povera COM function software system PowerCom Plus
TECHNICAL PARAMETERS :

MACHINE SERVICED BY WEINIG

- Width 20 -230 mm
- Working height 8 -170 mm

POWER CONTROL SYSTEM COM PLUS

- Spindles 50mm diameter
- Feed 5-36 m / min adjustable
- Pneumatically activated roller before the 1st bottom tool "high- low"
- The engine feed 7.5 kW

- Deck grooved
- Automatic central lubrication
- Barcode reader
- Only worked 469 man-hours

- Automatically adjusts the thickness of the planing motor 0.75 kW

Spindle alignment:

BOTTOM + RIGHT + LEFT + RIGHT + LEFT + TOP + TOP + BOTTOM

- All spindle system PowerLock

- Spindles - 8 pieces:

1. The spindle horizontal bottom - 11 kW 8000 r / min.
- CAS electronic digital display axial setting,

2. The head of law department - 7.5 KW 8000 rev / min,
- CAS electronic digital display axial setting,

3. Head left division - 11 kW, 8000 rev / min,
- CAS electronic digital display axial setting,

4. Right vertical spindle - 7.5 kW, 8000 rev / min
- The CAS DigiSet - Electronic digital display adjustment

5. Vertical head right - 7.5 kW, 8000 rev / min
- CAS DigiSet - electronic digital display,

6. The upper horizontal - 15 kW, 8000 rev / min
- CAS DigiSet additional digital display adjustment

7. The upper horizontal 11kW, 8000 rev / min
- CAS electronic digital display axial setting,

8. Lower the horizontal 7.5kW 8,000 rev / min
- CAS electronic digital display axial setting,

- Total power 85 Kw
- Height and width adjustable planing automatically
- Pneumatic clamping system of feed roller
- Feed drive for a cardan shafts
- Automatic adjustment of the desktop on thickness
- Touch control panel

The SET SYSTEM TRAY at the input of the receiving system
AUTOMATIC stacking

- Total power tables feeding rollers and receiving 5.5 kW

System Tray:

- The length of the tray 200 cm
- The width of the tray 220 cm
- Seven chains
- 20 rolls of cross-feed element to the next tray

- Tray 3 roll front of the machine
- Three pneumatic clamps
- Electrically adjustable height
- Clamp the material side

The collection of material:

- Receiving table 300 cm
- 27 pinch rolls receiving
- 5 strings astringent material
- 2 lanes feeding a machine for stacking
- The maximum width of 1350 mm spacers
- Size magazine for spacers 25 mm x 800 mm

This equipment is located in PL