Used NEW!!! SHARP VH-25 VERTICAL / HORIZONTAL KNEE MILLING MACHINE VH-25 For Sale

Asking Price
$27,000
Stock:
Only 1 Available on the Marketplace!
Seller:
Member ID 53357 - avatar

Sid S.

Member since: December 2014

More listings by this seller

Make an Offer Ask the Seller a Question
Name:
NEW!!! SHARP VH-25 VERTICAL / HORIZONTAL KNEE MILLING MACHINE VH-25
Listing Reference:
622495
Price:
$27,000
Location:
California, US
Age:
Unknown
Condition:
5
Description:

Make: Sharp Industries
Model #: VH-25
Serial #: 90401651
Condition: NEW!!! Features:

Separate motors for the vertical and horizontal spindles.
Infinitely Variable Spindle Speeds.
4 ~ 5 HP variable speed drive vertical spindle with #40 taper.
The vertical spindle is equipped with electro-magnetic brake for instant, fast action stop of the quill; it is also equipped with electro-magnetic lock for quick and simple change of tool holder. Power draw bar is available as an option.
The vertical head has a joystick that control forward and reverse of the spindle, a handy feature for most tapping operations. A separate lever controls spindle up and down feed.
The saddle is built with 2 oversized box ways, hardened and ground, to ensure the stability of the table under heavy milling conditions.
A single powerful motor drives the feed and rapid traverse of the table, saddle and knee. Powerful knee feeds allow deep boring and drilling of large work piece. It also allows simultaneous multi-axes feeds.
The table is equipped with slip clutch as overload protection, a superior design than shear pins.
The horizontal spindle speed goes as low as 35 rpm for heavy duty milling jobs.
Changeover from vertical to horizontal operation is quick and easy.
The machine is equipped with Climb Milling Compensator for smooth and stable horizontal climb milling operations.
The adjustable automatic lube system maintains proper lubrication at desired intervals to the saddle, the table, the knee and the column.
Manual movement of the table is controlled by hand wheel installed at the front of the table for easy operation.
Gears, shafts and pins are made out of Chrom-Moly material, hardened and ground for precision and durability. They are lubricated constantly via a pressurized lube system.
Ways are fully gibbed to ensure smooth sliding motions.
Newall DP700 Digital Read-Out System & all standard accessories. Specifications:

Work Table:
Surface Area: 56" x 10"
T-Slot Center Distance: 3 @ 2.5" centers
T-slot (nominal size x no. x pitch): 5/8" x 3"

Travels:
Travel (longitudinal x cross x vertical): 36 x 16.5 x 17.5"
Quill Travel: 5"

Vertical Spindle:
Spindle Taper: NMTB / NST #40
Speeds: 60 to 4,500 RPM
Distance from Spindle End Table: 5-1/8 to 23-5/8"
Distance Spindle to Column: 12.8 to 30.7"
Quill Feeds (in/rev): 0.0016, 0.003, 0.006

Horizontal Spindle:
Spindle Taper: NMTB / NST #40

Motors:
Vertical Spindle: 4 HP
Horizontal Spindle: 5 HP

Head Adjustments:
Swivel Angle of Head (left and right): 90º
Head Swivel: 360º

General:
Electrical: 220 / 440 Volt, Three Phase
Floor Area: 82" x 75"
Overall Height: 93"

Comes as shown in pictures.

Used equipment can sell very quickly. Contact the seller asap to discuss this NEW!!! SHARP VH-25 VERTICAL / HORIZONTAL KNEE MILLING MACHINE VH-25 .

Make an Offer Ask the Seller a Question
Asking Price
$27,000
Stock:
Only 1 Available on the Marketplace!
Seller:
Member ID 53357 - avatar

Sid S.

Member since: December 2014

More listings by this seller

Make an Offer Ask the Seller a Question
Make the Seller an Offer

Make the Seller an Offer

* required field

$ (USD)

Sending an offer to the seller does not constitute a legally binding agreement to purchase the equipment. However, please only make an offer if you are seriously interested.

Your offer will be emailed to the seller immediately. We will email you their reply as soon as we receive it.

Ask the Seller a Question

Ask the Seller a Question

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.