NEW GoldProR COMPAC

Listing description

FI/200
Technical Specifications:
Stainless steel reactor capacity : 200 litres
Weight of each Incinerator : about 1000 kgs.
Hourly Treatment Capacity : 12 kg per hour
Electrical Power Supply : 5 kw
Nominal Power : 40 kw
Maximum Power : 60 kw
Working Temperature : 900 ?C
Maximum Temperature : 1200 ?C
Gas Supply standard pressure : 20 - 40 mbar
Overall dimensions of the Incinerator : 2000 x 1600 x 2900 mm.
Necessary room's surface : About 20 square meters with 3 meters Height
Main advantages of this plant : Compact dimensions
Environmentally safe
Pyrolisis and Calcination processes
Proper metal recovery
Made in compliance with EEC norms
This plant has been conceived with a technology essentially based on the process of a controlled pyrolysis of the organic components with a subsequent thermal destruction of the latter into gas and contemporary calcination of the inorganic waste. This plant is in conformity with environmental regulations pollution, completing respecting emission allowances.
THIS SYSTEM HAS THE FOLLOWING CHARACTERISTICS : - Residual ashes are absolutely inactive because the calcination of the material eliminates all organic parts,this assures a nearly complete recovery of the metal. - It directly guarantees the passage of the fumes "in flame" and therefore at a constant temperature of over 1300 ?C (flame temperature). - It doesn't produce toxic fumes because it doesn't already produce them preliminarily during the combustion phase and the absence of particluate in the fumes guarantee absence of slime in the washer. Note : The elimination of organic parts involves the absence of carbonaceous residues,

such residues can be
the cause of loss of precious material during the following melting phase.
Note : An important parameter kept in great consideration by designers of after burners is the contact percentage
air to be purified-flame combustion that has to be the highest possible, assuring a permanence of the fumes at a determined temperature is not in fact enough to guarantee the correct destruction of the polluting substances, with this system thanks to the particular geometry of the chamber and the primary burner, this percentage of contact is elevated infact the polluting gases are not simply made to pass in the flame but they directly go to feed it.

This equipment is located in US