NEW Italimpianti FI

Listing description

fim-15pt
Technical Specifications:
Our melting furnaces for the production of platinum/pt-based sheet or wire range from small (500 gr capacity) to medium (1-4 kg) to large (22 kg). Unlike other low output generators commonly used for this purpose and generally equipped with valves, models produced by Italimpianti Orafi are unique on the market in that they work at medium frequency using high output generators. These offer a higher level of safety concerning harmful high frequency emissions and guarantee an energetic mixing of the alloys otherwise not possible. Working temperature up to 2000?C
Possibility to use crucibles made out of different materials such as graphite, clay-graphite, silicon carbide, zirconia silicate, ceramic etc.
Automatic temperature control by immersion thermocouple or optical pyrometer.
Automatic power control regardless of quantity or type of metal
Computerised alarm diagnostics available in four languages. Alarm messages appear on the display along with trouble-shooting guide lines.
Automatic turn-off function for the furnace and cooling plant if not used for a certain amount of time (useful at the end of the working day)
Circuit-check function on keyboard for an easy, guided remote control. Pouring can be done by manual extraction of the crucible, tilting by handwheel or hydraulic tilting
Technical Data of the furnace FURNACE TECHNICAL DATA
Crucible capacity : 1st box =1 Kg platinum, 2nd box = 3.8 kg platinum
Melting time : 3-15 minutes or 15-30 minutes (depending on whether the Pt is in powder, sheet or ingots)
Possiblity to change crucible to melt different alloys
Mechanical tilting system by handwheel
Dimensions : 800x1500x1700 mm (LxWxH)
STATIC FREQUENCY CONVERTER
Power output : 15 kW
Working frequency : 10 Khz
Power-supply tension : threephase
Power factor (cosF-i) : 0.9
Required cooling power (generator/furnace) : 10500 Kcal/h
Minimum water cooling capacity : 23 lt/min
Min pressure for the cooling water pump : 3 Bars
Cooling water inlet temperature : 30? + 35?C
Notes: The converter is fitted with a centrifugal pump to recycle the cooling water, fitted with a pressostat, thermals, fuses and a timer to automatically stop the pump. You require only a storage tank for demineralised water or a water cooling plant.
Display monitoring of the working parameters of converter as tension and absorbed power.
Computerised alarm diagnostics for as many as 12 alarms or warnings which the worker must take note of for the system to work properly. Instructions and advice are shown on the display.
Closed ring power regulation which allows the system to absorb the set power regardless of the quantity and type of metal to melt.
The internal environment of the convertor is conditioned by an air-water exchanger
Threephase power-supply transformer :
Nominal power: 15KVA
Nominal tension : depends on where the machines
Allowed fluctuation of the electrical mains : +/- 10%
Accessories: CERAMIC FIBRE PASTE FC700 102/A ?44,70
CRUCIBLE FOR 8 KG OF PLATINUM 119/A ?185,00
BOX FOR CRUCIBLE FOR PLATINUM 64/A ?1.343,60
ZIRCONIA CRUCIBLE FOR PT 4 KG 77/A ?135,00
ZIRCONIA CRUCIBLE FOR PLATINUM KG 1 78/A ?110,00
HOLDER FOR CRUCIBLE KG 4 PLATINUM 79/A ?107,60
PAG POWDER FOR PLATINUM CRUCIBLE 80/A ?8,90
GRAPHITE INGOT MOULD FOR PLATINUM 81/A ?587,00
GRIPPING FOR INGOT MOULD FOR PLATINUM 82/A ?1.580,00
GRAPHITE INGOT MOULD FOR PLATINUM WIRE 83/A ?371,70
HOLDER FOR 1 KG PT CRUCIBLE 93/A ?87,50
MANUAL ELECTRIC COMMUTATOR TWO POSITIONS COM/V ?6.510,00
PLATINUM INGOT ANNEALING FURNACE PT/ACC ?1.900,00

This equipment is located in US