Used Okuma 750 For Sale

Asking Price
Only 1 Available on the Marketplace!

Rick B.

Member since: August 2007

More listings by this seller

Contact the Seller
Listing Reference:

Okuma CNC Millturn x4,000mm 2013
Technical details
turning diameter 1050 mm
turning length 4000 mm
control OSP P300S
total power requirement kW
weight of the machine ca. 43,5 t
dimensions of the machine ca. 9725 x 3532 mm
Additional information
Long Boring Bar Stocker,
80 Tool ATC, Capto C8,
Big Spindle Bore 185mm dia,
600mm Kitagawa Chuck,
SMW K6 Steady 215 – 510mm dia,
Y axis Turning Function

Technical Specification
Swing over Slide 1050 mm
Max Turn diameter 1050 mm
Max Turning length 4000 mm
X-axes traverse 1080 mm
Z-axes traverse 4215 mm
Y-axes traverse 660 mm (-330 + 330 mm)
Spindle rotation Fully controlled CNCspindle

B-axes Fully Controlled CNC
Spindle speed 14 - 1500 rpm
Spindle nose JIS A2-15
Spindle bore 185 mm
Spindle dia. In front 280 mm
Tool holder No. 1 H1 ATC
Tool diameter 32x32/Ø63 mm
Spindle speed driven tools 40 – 10.000 rpm
Rapid feed X-axes 40000 mm/min
Rapid feed Z-axes 30000 mm/min
Rapid feed Y-axes 40000 mm/min
Rapid feed C-axes 100 rpm
Feed X, Y, Z-axes 0.001-1.000.000 mm/r
Tool arm Capto C8
ATC 80
Max tool dia. Full/empty Ø 135/300 mm
Max Tool Length 600 mm
Max Tool weight 30 kg
Quill diameter Ø 180 mm
Quill taper MT6
Quill traverse 350 mm
Spindle power VAC 45/37 KW
Milling spindle power VAC 37/30/22 kW
Machine height 3607 mm
Floor space 9725 x 3532 mm
Machine weight 43500 kg

Standard specification / Equipment
Spindle motor VAC 45/37 KW
Milling Spindle speed 40 – 10.000 rpm
Touch setter automatic
Coolant through the Spindle rotating tools
15 ”touch” screen
Coordinate Conversion
Creative machine function
3D simulation
Check for cycle time
Load monitor
NC monitor
Reduction of cycle time
Calculation of cycle time
Memory 2GB
2 off USB ports
CAS Okuma anti-collision system

Extra Equipment:
· One Touch Advance IGF – dialog programming
· Automatic Door
· Helical interpolation
· Coolant through the spindle prepared for 70 bar
· ATC for 80 tools
· Swarf conveyor
· Boring bar specification including 3 positions for bars
· Automatic tool change of the Long boring bar via ATC
· Capto C8 in H1
· Machine is prepared for SMW K6,1 hydraulic steady with its own axes
· SMW K6.1 Steady (215- 510 mm)
· Full B-axes with Super Nurbs and, Tool Centre Point control
· Flange for mounting of Sandvik ”long boring bar” 80 mm
· Flange for mounting of Sandvik ”long boring bar” 120 mm
· Large Spindle bore Ø185 mm,spindle motor 45/37 KW, spindle speed 1500 rpm
· Kitagawa 24” chuck and cylinder for big spindle bore
(Standard. Kitagawa 18” was not delivered with the machine)
· Rotating window on the left door (height 1,80 m over the floor)
· Y-axes turning function
· ”Thread phase matching”
· Slide hold in thread cycles
· Synchronised threading on the main spindle (rigid tapping)
· Variable spindle speed in threading cycles (VSST)
· Extreme low turning speed (special spindle speed)
· (anti interference function)
· Controlled Tailstock with its own axes
· 10,000 rpm, VAC37/22/15kW (3 min./30 min./cont.) milling spindle

Used equipment can sell very quickly. Contact the seller asap to discuss this Okuma 750.

Contact the Seller
Asking Price
Only 1 Available on the Marketplace!

Rick B.

Member since: August 2007

More listings by this seller

Contact the Seller
Contact the Seller

Contact the Seller

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.