OKUMA GA-25T

Listing description

2011 Okuma GA-25T

Control: OSP-U-10G
Condition: Excellent
Under Power: Yes

Specifications:
Maximum Wheel Size (OD x Width x ID): 20.08" x 4.92" x 8"
Distance between centers: 13.78"
Swing over table: 12.99"
Max grinding diameter: 7.87"
Max. workpiece weight (center supported): 110 lbs
Max. workpiece weight (chuck supported): 88 Lbs x 7.87"
Number of speed steps: Infinite
Max. grinding speed: 106.30 IPM
X-Axis:
Wheelhead - Travel: 16.34"
Rapid Traverse Rate: 0.79 IPM
Minimum Command Increment: 0.000004"
Z-Axis:
Saddle - Travel: 20.28"
Rapid Traverse: 787 IPM
Minimum Command Increment: 0.000004
Workhead:
Tapered Bore: MT #4
Speed: 650 RPM
Number of speed steps: Infinite
Tailstock:
Tapered Bore: MT #4
Quill Travel: 1.97"
Auto Taper Adjustment: +/- 0.003"
Motors:
Wheel Spindle: 10 HP
Workhead (C-Axis): 2.7 HP
Wheelhead (X-Axis) Feed: 1.6 HP
Saddle Feed: 2.7 HP
Coolant Pump: 1.5 HP
Hydraulic Oil-Lube Pump: 0.5 HP
Wheel Spindle Lube Pump: 0.13 HP
Tank Capacity:
Coolant Tank: 75.7 gallons
Hydraulic Oil - Lube Tank: 75.7 gallons
Wheel Spindle - Lube Tank: 75.7 gallons
General:
Weight: 10,560 Lbs
Equipped With:
OSP-U-10G Control
Auto direct work sizing system
*Marposs 1 head type
*Diameter 8-106 mm
*Gauging head
*1 set of Marposs Micromer 3
*amplifire: 1 set of Marposs E 9
Arrangement for above
Spindle orientation, prox. Switch type
heavy duty wheel spindle drive motor, 15 KW-4P inverter control instead of
standard motor
Marposs work locator, wheelhead mount type T25G
wheel flange for 25-75 mm width for 25T
wheel flange for 65-125 mm for 25T
wheel balancing arbor, dia 70 mm
wheel balancing stand for max dia 510mm (fixed type) wheel for 25T (std wheel
is 75 mm)
bed flusher coolant.

Comments:
156 hours of working hours
Seller to load on buyer's truck at machine location (Croatia)

This equipment is located in US