-
Machinery
Choose from 20,247 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Optimizing Dimter OptiCut 450 Super
- Machines in stock
- Perfect condition
- Year 2008
- Feed speed of 300 m / min
Min. Nominal cross-section of 30 mm x 12 mm
Min. Inlet length of 500 mm
Min. Incoming automatically fed length of 900 mm
Max. length 6300 mm added
Max. feed speed of 300 m / min
Cutting accuracy up to 1 m cutting length + - 0.8 mm
The accuracy of the cut to 2.5 m in length Cutting + - 1.5 mm
Min. Cutting length / at the end of the workpiece 110mm - 180mm
equipment:
• VarioSpeed
• Servo
• Fixed length cutting / removal of defects
• Full optimization of max. Length added:
fixed and variable length, up to 8 characteristics 16 groups,> 100,000 lengths
• Patented efficient waste gate
• Automatic sorting into 8 sections
The entire device (line) is made up of the following stations and units:
1) 3 pieces of roller conveyors permanent marking on the roller conveyor to the marking chalk are labeled with the luminescent quality and defects of wood. Then the timber, places marking up is moved to the next, forward roller conveyor. Adjustable mirror allows you to view the underside of the boards.
2) 3 pieces after returning roller conveyors from the space station, marking station marking the wood is moved on the conveyor roller and adjustable head-on at its edge. Then the timber is lowered onto the transport chain.
3) chain conveyors transverse Using the cross-conveyor timber moves to the side guiding ruler. Transportation transverse complies with the role of a buffer magazine. The lower roll of the pull out swings up and raises the timber from the conveyor section. Upper pressure roller is lowered and the timber, by means of the guide roller is fed in at the side guide to the next measuring station of the scanner.
4) The length measurement of fluorescence camera
5) The transverse conveyor for transverse cutters
6) Optimization cross saw OptiCut 450 Super
7) A conveyor belt output / sorting station
DimterLine OptiCut 450 Series offers the fastest cross-OPTIMIZING for all industry requirements. Positioning at a rapid pace, cutting, sortowanie- and all with maximum use of wood. Modern plants need this wydajnosci- in cutting length, cutting faults and at optimization. This saw is not only the fastest but also the most reliable, accurate and extremely user friendly. Simply set up the machine and immediately produce - economically and with maximum performance also in continuous operation. Machines leader in this technology DimterLine make it possible.
This equipment is located in PL
Manufacturer | Optimizing Dimt |
Model | Optimizing Dimt |
Year | 2008 |
Country | Poland |
Condition | Good |
Main category | Woodworking |
Subcategory | Wood Saw |
ID | P51222015 |
Client type | Machinery dealer |
On Kitmondo since | 2015 |
Number of listings | 0 |
Country | Poland |
Last activity | May 22, 2021 |