Used Palmary GU20X40NC For Sale

Asking Price
Contact Me for Price
Stock:
Only 8 Available on the Marketplace!
Seller:
Member ID 12294 - avatar

Art L.

Member since: July 2011

More listings by this seller

Make an Offer Ask the Seller a Question
Name:
Palmary GU20X40NC
Listing Reference:
599422
Price:
Contact Me for Price
Location:
NJ, USA
Age:
1968
Description:

7.87'' Swing 15.75'' Centers Palmary GU20X40NC OD GRINDER, PROGRAMMABLE ELECTRONIC INFEED, POWER OTW DRESSER;Reference Number: 153239;8" X 16" PALMARY (MADE IN TAIWAN) "HIGH PRECISION" UNIVERSAL CYLINDRICAL GRINDER WITH PROGRAMMABLE PLC ELECTRONIC INFEED CONTROL MODEL: GU20x40NC NEW: 2012 ACTUAL SWING................................... 7.87" DISTANCE BETWEEN CENTERS....................... 16" MAX. WORKPIECE WEIGHT.......................... 132 LBS. HYD. TABLE TRAVERSE, INF. VARIABLE............. 2" TO 157" IPM SWIVEL TABLE GRADUATED......................... -3 DEG./+12 DEG. WHEELHEAD: SWIVELS LEFT & RIGHT OF CENTER................. +/- 30 DEGREES HANDWHEEL GRAD................................. 0.0002" INFEED PER REV. OF HANDWHEEL................... 0.1" WHEELHEAD MOTOR................................ 3 H.P. STD WHEEL SPEED................................ 2,085/2,495 RPM WHEEL SIZE..................................... 12" OR 14" DIA. POWER RAPID WHEELHEAD STROKE................... 1" AUTOMATIC WHEELHEAD INFEED (ON DIA.)........... 0.0001" TO 3.9" AUTO PLUNGE FEED RATE.......................... YES WORKHEAD: WORKHEAD SWIVELS (LEFT & RIGHT)................ 90 DEG. CCW, 30 DEG CW WORKHEAD SPINDLE SPEEDS........................ 16 TO 450 RPM WORKHEAD CENTER TAPER......................... #3 MT WORKHEAD MOTOR................................. 1 HP TAILSTOCK: QUILL TRAVEL................................... 0.787"" SPINDLE TAPER.................................. #3 MT APPROXIMATE WEIGHT............................. 4,400 LBS MACHINE FEATURES: PROGRAMMABLE (PLC) AUTO INFEED CONTROL (INCH & METRIC) W/MULTI-LINE DISPLAY, BALL SCREW & SERVO MOTOR DRIVE: -AUTO INFEED @ TABLE REVERSALS -AUTO PLUNGE FEED (DUAL RATE - COARSE & FINE FEED SELECTION) -WHEELHEAD RETRACTS TO ORIGINAL POSITION AUTOMATICALLY AFTER CYCLE COMPLETION OF GRIND CYCLE -SPARKOUT TIMER -AUTO TABLE PARK (LEFT OR RIGHT) @ COMPLETION OF CYCLE HYDRASTATIC WHEELHEAD BEARINGS HYDRAULIC TABLE TRAVERSE AUTOMATIC LUBRICATION SYSTEM CARRIAGE AND WHEELHEAD WAYS ARE AUTO LUBRICATED 14" DIAMETER GRINDING WHEEL, 1" TO 2" WIDE, x 5" BORE 3 H.P. GRINDING WHEELHEAD MOTOR MACHINE MOTORS ARE WIRED FOR 3/60/230-460 VOLT OPERATION "The NC series are fully automatic, the wheel head slide is driven by Servo Motor and Ball Screws and controlled by PLC for fully programmable grinding cycles. The table longitudinal movement is by hydraulic cylinder. MACHINE BASE CONSTRUCTION The machine base is manufactured of high quality Meehanite cast iron, heat treated and stress relieved before machining. All slideways arehardened and precision ground. The slideways of the table and the wheel head are lubricated by an advanced, automatic, hydrostatic lubrication system. This system provides extremely smooth and accurate movement, allowing for superior grinding accuracy. PRECISION GRINDING WHEEL HEAD The grinding wheel spindle is manufactured of SNCM-220 high-quality alloy steel. It is normalized, tempered, carborized and sub-zero treated,precision ground and micro finished. Its hardness is to 62+ HR/c. This manufacturing process assures stability, maximum wear resistance and lifetime accuracy. The grinding wheel spindle utilizes special hydrostatic bearings, specifically designed for precision grinding. These bearings are designed for high-speed, frictionless, non-heat generating, stable operation. They ensure longer spindle life coupled with extremely high accuracy. WORK HEAD SPINDLE The spindle runs on precision bearings, assuring maximum stability and accuracy. The spindle head swivels +90 degrees to -30 degrees. The spindle head is driven by brushless AC servo motors, providing variable speed from 16 to 450 rpm." Equipped With: Power Over-the-Wheel Dresser Semi-enclosure with Oil Mist Collector Spare Grinding Wheel Flange 3-Jaw Scroll Chuck (5?), Magnetic Coolant Separator (40 L/min.) Paper Filter (40L/min.) Hydraulic Tailstock MACHINE AS EQUIPPED, Cost in 2012 was $80,795.00 Special Note: Swing Down I.D. Grinding Attachment with I.D. Spindle is Available to Purchase New, from the OEM's USA Representative, Maximum Advantage Carolinas, (803) 802-3010, http://www.maxgrind.com This machine was purchased for a job that was discontinued shortly after it began. The machine has less than 200 Hours Use! This is a special opportunity, to buy an essentially new machine for over 30k less than the Original Acquisition Price. ** Like New Condition & Appearance ** ** Inspect Under Power in our Harrison, NJ Warehouse **

Used equipment can sell very quickly. Contact the seller asap to discuss this Palmary GU20X40NC.

Make an Offer Ask the Seller a Question
Asking Price
Contact Me for Price
Stock:
Only 8 Available on the Marketplace!
Seller:
Member ID 12294 - avatar

Art L.

Member since: July 2011

More listings by this seller

Make an Offer Ask the Seller a Question
Make the Seller an Offer

Make the Seller an Offer

* required field

$ (USD)

Sending an offer to the seller does not constitute a legally binding agreement to purchase the equipment. However, please only make an offer if you are seriously interested.

Your offer will be emailed to the seller immediately. We will email you their reply as soon as we receive it.

Ask the Seller a Question

Ask the Seller a Question

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.