Pressmaster PB-60-6

Listing description

60 Ton 72'' Bed Pressmaster PB-60-6 NEW PRESS BRAKE, FOPBG, MADE IN N. AMERICA;Reference Number: 130173;NEW PRESSMASTER 6' X 60 TON HYD. PRESS BRAKE;MODEL PB-60-6;MAXIMUM TONNAGE.................................... 60;APPROACH SPEED..................................... 70 IPM;PRESSING SPEED..................................... 16 IPM;RETURN SPEED....................................... 86 IPM;OVERALL BENDING LENGTH............................. 72";DISTANCE BETWEEN FRAMES............................ 60.5";THROAT DEPTH....................................... 8";BED HEIGHT......................................... 33";WIDTH OF BED TOP................................... 2.375";MAXIMUM ADJUSTABLE STROKE.......................... 4";OPEN HEIGHT........................................ 11";CLOSED HEIGHT...................................... 7";HYDRAULIC OIL RESERVE.............................. 38 GAL;MOTOR HP @ 1750 RPM................................. 5HP;VOLTAGES AVAILABLE: 230/460/575 3 PH 60 HZ;DIMENSIONS: 84" L X 38" D X 84" H;WEIGHT: 6,000 LBS.;STANDARD FEATURES;- INCLUDES MOTORIZED FRONT OPERATED BACK GAUGE, WITH;READOUT AND FINE HANDWHEEL ADJUSTMENT.;- MOVABLE FOOT PEDAL CONTROL.;- JOG MODE USED FOR SIMPLIFYING SET-UP.;- QUALITY BALDOR MOTOR, LOW SPEED.;- FULLY ENCLOSED CONTROL PANEL COMPLETE WITH LOW VOLTAGE;CONTROL.;- ALL MAJOR PIVOT POINTS AND SLIDES ARE LINED WITH;ZINCALLOY TO PROVIDE HIGH LOAD CAPACITY (60,000 PSI) AND;LOW FRICTION. ZINCALLOY REQUIRES NO LUBRICATION AND WILL;PROVIDE YEARS OF MAINTENANCE-FREE SERVICE. ZINCALLOY IS;WIDELY USING IN MINING APPLICATIONS, LIKE BUSHINGS USED IN;WHEELS OF RAIL CARS HAULING COAL UNDER GROUND IN A DIRTY;ENVIRONMENT - THE PERFECT BEARING SURFACE FOR HARSH;CONDITIONS.;- THE DUAL RAM SPEEDS ARE CONTROLLED THROUGH LIMIT SWITCHES;ALLOWING FOR RAPID RAM MOVEMENT TO POINT OF CONTACT. THE;REMAINDER OF THE RAM TRAVEL IS AT A SLOWER BENDING SPEED.;- THE RAM IS MACHINED TO ACCEPT NORTH AMERICAN STYLE;TOOLING.;- THE BED IS ADJUSTED INSTEAD OF THE RAM TO ALLOW PERFECT;RAM/RAM-GUIDE ALIGNMENT. TILT ADJUSTMENT IS CONVENIENTLY;LOCATED ON THE FRONT OF THE MACHINE.;- THE BED IS DRILLED AND TAPPED TO EASILY ALIGN DIE RAIL;FOR ACCURATE TOOL ALIGNMENT.;- THE FULL LENGTH OF THE BED IS SLOTTED.625" WIDE X.750";DEEP.;- ALL HYDRAULICS, ELECTRICAL & MECHANICAL PARTS ARE THE;STANDARDS IN THE INDUSTRY, AND AVAILABLE THROUGHOUT NORTH;AMERICA.;HOW DO PRESS BRAKE TRANSMIT POWER TO THE RAM AND ASSURE;PARALLELISM, EVEN WHEN LOADS ARE NOT EVENLY DISTRIBUTED?;SOME MANUFACTURERS USE THE TORQUE TUBE DESIGN TO CONNECT;THE TWO END LEVERS TOGETHER. OTHERS USE A STABILIZER BAR;DESIGN SUPPORTED ON EACH SIDE OF THE MAIN FRAME AND;ATTACHED TO THE RAM BY USE OF A LINKAGE SYSTEM. WE AT;PRESSMASTER USE BOTH SYSTEMS TO BUILD A PRECISION PRESS;BRAKE THAT ASSURES HIGH RIGIDITY AND PARALLEL MOVEMENT.;OUR OBJECTIVE AT PRESSMASTER IS TO PROVIDE AN ACCURATE;RELIABLE MACHINE OFFERING A HIGH RETURN ON YOUR INVESTMENT.;OUR MACHINES HAVE ALL THE FEATURES REQUIRED FOR LONG LIFE;AND EASE OF OPERATION. THEY ARE SIMPLE ENOUGH FOR EVEN;INEXPERIENCED OPERATORS TO MASTER QUICKLY.

This equipment is located in US