Scotchman DO 150/240-24M

Listing description

150 Ton 12'' Throat Scotchman DO 150/240-24M *Made in the USA* NEW IRONWORKER, dual operator, 5 stations, 10 hp 3 ph 230/460v;Reference Number: 136599;NEW SCOTCHMAN 150 TON IRONWORKER;MODEL: DO 150/240-24M;*MADE IN THE USA*;STANDARD FEATURES;Dual operator allows for two operators to work at the same time at full capacity;150-ton punch station (1-7/8" in 1");Keyed punch ram for safety;12" throat depth;Punch gauging table with fence and scale;Die holders- 2", 2-1/2", and 3";Punch nut with wrench and stripper;Adjustable swing-away stripper;One round punch & die: max. diameter 1-1/4";Punch jog control;Two adjustable electric stroke controls with scale;Two electric remote foot pedals;Two 2-stage hydraulic pumps;Two valves;Angle shear capacity @ 90 degrees: 6" x 6" x 1/2";Rectangle notcher 3" x 5-3/4" x 1/2";Notcher table with guides;240-ton, 24" flat bar shear with sabre blade;Shear table with miter fence;Tool table work area;Slug receptacles;Electrical box supplied with emergency palm button and lock-out tag-out accommodations;230/460 volt/3-ph electrics (must specify voltage);All guards necessary to comply with ANSI B 11-5 standards;Forklift accommodations;Three-year warranty on parts;CAPACITIES AND SPECIFICATIONS;RATED ON A36 MILD STEEL/65,000 PSI TENSILE;Punching capacity.................................. 150 ton (136 mt).................................. 1-1/2" in 1-1/4" (38 mm in 32 mm).................................. 1-7/8" in 1" (48 mm in 25 mm).................................. 2-1/2" in 3/4" (63 mm in 19 mm);Special tooling.................................... 4" max. dia. (100 mm max. dia.);Throat depth....................................... 12" (300 mm);Flat bar shear................................. 240 ton, 24" length (600 mm);(sabre blade-std.)................................. 1" x 14" (25 x 355 mm)................................. 3/4" x 24" (19 x 610 mm);Angle shear;90 degrees........................................ 6" x 6" x 1/2" (150 x 150 x 12 mm);45 degrees........................................ 3" x 3" x 3/8" (75 x 75 x 10 mm);(w/Bar shear)..................................... 4" x 4" x 1/2" (100 x 100 x 12 mm);Brake 12".......................................... 90 ton (81.6 mt);Brake 24".......................................... 70 ton (63.5 mt);Open end brake..................................... Max. 1/4" x 5" (6 x 125 mm) flat or angle iron;Pipe notcher....................................... 3/4", 1" (19 mm, 25 mm);Schedule 40....................................... 1-1/4" (32 mm)....................................... 1-1/2", 2" (38 mm, 50 mm);90 degree V-notcher................................ 6" x 6" x 5/16" (150 x 150 x 8 mm);Rectangle notcher.................................. 3" x 5-3/4" x 1/2" (75 x 145 x 12 mm);V-notch............................................ 3" x 3" x 1/2" (75 x 75 x 12 mm);Notching in leg of channel......................... 6" to 10" (150 mm to 250 mm);Channel shear...................................... 2" to 6" adj. (50 mm to 150 mm);Strut shear........................................ samples required;Rod shear;Round rod (max.).................................. 1/4" to 1-1/4", 9 cavity (6 mm to 32 mm);Square rod (max.)................................. 1/4" to 1", 1 cavity (6 mm to 25 mm);Square tube shear.................................. 1/2" to 2", 12 gauge (12 mm to 50 mm, 2.75 mm);Picket tool........................................ 1/2", 3/4", 1" (12 mm, 19 mm, 25 mm)........................................ 16 gauge (1.6 mm);Offset die holder.................................. Max. 40 ton (36 mt);Strokes per minute;In light material................................. 52 spm (1/4" stroke) [punch station];In heavy material................................. 17 spm (3/4" stroke) [punch station];Hydraulics......................................... 3,500/3,500 psi (241/241 bar);Motor;Standard.......................................... 10 hp 3 ph (7.46 kW) 230/460/208/380/575v;Optional.......................................... 10 hp 1 ph (7.46 kW) 230v;Dimensions......................................... 77-1/4" L x 34" W x 74-1/4" H......................................... (174 cm x 119 cm x 187 cm);Shipping weight.................................... 6,404 lbs. (2,904 kg);OPTIONAL STANDARD TOOLING (CALL FOR PRICING);12" & 24" brake;Open end brake;Pipe notcher;90 degree V-notcher;Rectangle notcher;6" x 6" die holder;Channel shear;Tube shear;Rod shear;Picket tool;Offset die holder;Unequal leg angle blades;Punch slug receptacle;Strut shear;Urethane stripper;Brake length gauge with scale (12" & 24" brakes);Brake table with scale & squaring arm (12" & 24" brake);Multi-loc punch gauging table (36" and 85" extensions available);48" back gauge;Hydraulic hold-down;Laser light;Tool table extension with punch and die storage;24" x 5' conveyor with angle iron support;Punch table extension;*We will meet or beat virtually any price on the web. We also offer special financing deals with integrated discounts for qualified customers.

This equipment is located in US