Semitool Spray Solvent T

Listing description

SEMITOOL SPRAY SOLVENT TOOL (SST) consisting of:

- Model: SST-C-742-280K
- Class 1 SST
- Automated Spray Solvent Tool (SST)
- Process Applications: Polymer Removal, Resist Stripping, Wafer Cleaning, Metal Lift-Off
- Batch Solvent Processor for Wafer Cleaning
- Max wafer size: 8/200mm Wafers
- Dual Chamber (for single 25 Wafer Cassette)
- 2 Rotor included (select size at time of order)
- 7 Stainless Steel Tanks (4 Heated & 3 Ambient)
- Front Touch Screen
- Semitool 302 Controller
- Fume Detection
- Fire Suppression System
- Operators Manual
- Available for Full Inspection and Demonstration at ClassOne!

CLASSONE''S SEMITOOL SPRAY SOLVENT TOOL (SST) REFURBISHMENT PROCESS consists of:

- Bowls sent out for electro-polishing as needed.
- NEW Tank O-rings installed (ClassOne standard).
- NEW Door Seals installed (ClassOne standard).
- NEW Rear Bowl Seals installed (ClassOne standard).
- NEW Vibration Isolators installed (ClassOne standard).
- NEW N2 Filters installed (ClassOne standard).
- Upgrade Option: NEW Chemical Filters (various filter sizes can be installed but must be requested).
- Front User Interfaces (F.U.I.s) are inspected and serviced or replaced as needed.
- All Nozzles are inspected visually, tested for spray pattern and replaced as needed.
- Nozzles are clocked to 40 degrees (other configurations completed upon request).
- Rotor Stop Positioners are inspected and service or replaced as needed.
- Drain Box Manifolds are disassembled, inspected and serviced as needed.
- Chemical Pumps are disassembled, inspected and serviced as needed.
- EMO Button(s) and Circuit(s) are tested.
- Door Windows are replaced as needed.
- Door Up / Down movements and drives are serviced or replaced as needed.
- Delivery lines are repaired or replaced as needed.
- Pneumatic lines are repaired or replaced as needed.
- Wiring is repaired or replaced as needed.
- System Leveling Feet are replaced as needed.
- System Wheels are replaced as needed.
- During Quality Assurance testing the system is run to verify RPM regulation and stability under normal operation.
- During Quality Assurance testing the system is run to verify without excessive vibration normal operation.
- During Quality Assurance testing the system is run to verify that the valves both operate properly and do not leak by under normal operation.

This equipment is located in US