-
Machinery
Choose from 20,248 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
13'' Swing 40'' Centers Sharp 1340VS ENGINE LATHE, D1-4 Camlock with 1-9/16'' bore, precision lathe;Reference Number: 136735;NEW SHARP 13" x 40" HI-SPEED PRECISION LATHE;d MODEL: 1340VS w/Digital Variable Speed MADE IN TAIWAN;FEATURES;- variable speed spindle drive with digital display;- hi-low gear shift for spindle speed, range from 40 - 2,000 RPM;- hardened & ground gears in headstock;- directional control of carriage feed in front of apron for easy operation;- jog button for easy engagement of gears;- induction hardened & ground bedways for rigid structure;- spindle supported by 2 high precision tapered roller bearings;- carriage equipped with overload clutch to protect gears & screws;- available for 3 phase or single phase electrics operation;- electrically activated foot brake for quick stopping action;- built-in cabinet for tools storage;CAPACITY;Swing over bed: 13";Swing over crosslide: 8-5/16";Swing over gap, width: 18-1/2";Width of bed: 7-1/2";Distance between centers: 40";HEADSTOCK;Spindle nose type: D1-4 Camlock;Spindle bore: 1-9/16";Spindle Speeds (Inf. Variable): 40 - 2,000 RPM;Taper of spindle bore: MT #5;THREADS & FEEDS;Longitudinal feeds - inch per rev (40): 0.0016 -.0046;Cross feeds - in per rev (40): 0.0005 - 0.015;Inch threads (39): 2 - 56 TPI;Metric threads (42): 0.5 - 12mm;Leadscrew pitch, diameter: 8 TPI, 1";CARRIAGE;Cross slide travel: 6-3/4";Compound travel: 3-1/2";Apron width: 11";Cross slide width: 4.5";BED;Bed length: 64";Bed width: 7-1/2";TAILSTOCK;Quill travel (graduated): 4";Quill diameter: 1-9/16";Quill taper: MT #3;GENERAL;Motor: 3 hp (220 Volts, Your Choice of Single Phase or 3 Phase);440 Volt Operation requires an optional transformer;Net weight (approximately): 1,580 lbs;STANDARD EQUIPMENT;coolant system, 4-way toolpost, steady rest, thread dial, foot;brake, center sleeve (MT #5 x #3), dead centers (MT #3) tool kit;removable gap block & splash guard.;OPTIONAL EQUIPMENT (Call for prices);Follow rest, digital readout system, taper attachment, micrometer;carriage stop, 3-jaw scroll chuck (8"), 4-jaw chuck (8"), face plate;(12"), single toolpost, live center (MT #3), & drill chuck.
This equipment is located in US
Manufacturer | Sharp |
Model | 1340VS |
Year | - |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Lathe |
ID | P503201820 |
Client type | Machinery dealer |
On Kitmondo since | 2011 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 1971 |
Last activity | Oct. 21, 2022 |