Sharp SG-618 3A

Listing description

6'' Width 18'' Length Sharp SG-618 3A SURFACE GRINDER, 3 Axis Automatic w/IDF;Reference Number: 136869;NEW SHARP 6" x 18" AUTOMATIC SURFACE GRINDER;d MODEL: SG-618 3A ** MADE IN TAIWAN **;With a numerically controlled downfeed system;CAPACITY;Maximum grinding length: 19.7";Maximum grinding width: 5.9";Maximum distance: table to spindle center: 15.7";d;TABLE;Working Surface (W x L): 5.9 x 18.3";Maximum longitudinal travel: 21.6";Maximum cross travel: 7";d;FEED;LONGITUDINAL MOVEMENT OF TABLE;Hydraulic feed: 3.3 - 82 FPM;Hand feed per revolution: 2.7";CROSS MOVEMENT OF TABLE;Intermittent feed: 0.006 - 0.3";Continuous transverse feed: 47.2 IPM;Hand feed per revolution:.02";Graduation of hand wheel: 0.0005";VERTICAL MOVEMENT OF WHEEL HEAD;Hand feed per revolution: 0.04";Graduation of hand wheel: 0.0001";Rapid feed: 1.1 - 9 IPM;d;AUTOMATIC DOWN FEED SYSTEM;Feed rate (coarse/fine): 0.00005 - 0.00495";Total stock removal: 0.00005 - 9.99995";Fine feed stock removal: 0.00005 - 0.00495";Spark out: 0 - 9 passes;Automatic Return to Zero;Traverse and Plunge Grinding Auto Cycles;d;SPINDLE AND WHEEL;Spindle motor: 1-1/2 hp (220v or 440v 3ph /60 cycle);Spindle speed: 3,600 RPM;Grinding wheel outside diameter: 8";Grinding wheel bore: 1.25";Grinding wheel width: 0.63";d;GENERAL;Motor (hydraulic): 1.0 hp;Floor space (W x H x L): 83 x 51 x 80";Net weight (approximately): 2,200 lbs.;d;FEATURES;DOUBLE 'V' WAYS FOR CROSS TRAVEL AND ONE 'V', ONE FLAT;WAY FOR LONGITUDINAL TRAVEL-BOTH WAYS ARE HAND-;SCRAPED AND COVERED WITH TURCITE "B" COATING;AUTOMATIC CROSS FEED;ACCURATE SLOT GRINDING ACHIEVED USING SADDLE;LOCKING SYSTEM COMBINED WITH CROSS FEED BALL SCREW;AUTOMATIC LUBRICATION SYSTEM;ADVANCED HYDRAULIC SYSTEM WITH INDEPENDENT OIL TANK;PROVIDES VIBRATION-FREE TABLE MOVEMENT;HYDRAULIC TABLE STROKE SETTING;STANDARD EQUIPMENT;Grinding Wheel;Wheel adapter;Work light;Balancing arbor;Diamond dresser;Tool kit;d;OPTIONAL (EXTRA COST) ACCESSORIES;Permanent magnetic chuck - coarse or fine pole (Kanetsu);Electro-magnetic chuck with control (Kanetsu or Walker);Spare wheel adaptor;Coolant systems with or without paper filtration;Dust collector;Parallel dresser;Wheel Balancing stand;Splash Guards for coolant;Digital readout system (Sony, Acu-Rite or Newall available);10" x 3/4" Grinding Wheel (With Inverter Spindle Drive)

This equipment is located in US