Wagner WAM-90

Listing description

ONE – USED WAGNER FULLY AUTOMATIC SAW FOR NON-FERROUS METALS WITH HEAVY DUTY GRAVITY FEED MAGAZINE
MODEL WAM-90

YEAR: 1997

Saw Specifications:
Capacity:
Round: 3-1/2” maximum – 5/8” minimum
Square: 3-1/8”
Rectangles: 4-1/2” x 3-1/8”
Max blade diameter: 315mm x 2.0 mm x 32 mm
Cutting speeds: 900/1800 rpm
Sawblade motor: 14/20 HP
Automatic feed: Maximum 12” cut-off length – minimum 3/8”
Feed speed: Infinitely variable from 1” to 80” IPM
Electrics: 460 volt, 3-phase, 60 Hertz
Chip conveyor: Hinge belt type
Discharge height: 43”
Coolant: Unist spray mist system

Loading Table:
The slope of the 20’ loading table can be adjusted to permit controlled rolling of round bars or sliding of shapes and rectangular stock. Loading cams orient and transfer the various material shapes one at a time onto the infeed roller track.
They are always positioned for optimal clamping and the shortest cutting path.
The bar feeding mechanism consists of a hydraulically traversed pusher carriage.
Infeed rates up to 130 ft./min. are possible.
This concept enables positive infeeding at highest possible speeds.
Maximized production rates especially for long cutoffs, is assured.

Special Features:
•Machine base of welded steel construction
•Free chip flow design with funneling mounted to hinge belt conveyor
•Optimum cutting path through pivot under the clamping area
•Saw carriage supported by heavy tapered roller bearings with lifetime lubrication
•Precision clamping
•Feed cylinder and sawblade are on the same plane to avoid lateral forces
•Automatic crop adjustable from 3/8” to 3-1/2”
•Minimum remnant end of 2-1/2”
•Automatic precision length gauge, hydraulically controlled with cushioning
•Micrometer fine tune adjustment for setting within .002”
•Electric piece counter with automatic shut-off control

This equipment is located in US