Welch Allyn Propaq Encore,

Listing description

Welch Allyn Propaq 206 EL

Includes Hard Case and Accessories (See Photos and List Below):
Propaq Encore 206 EL Monitor w/SPO2 NIBP INVASIVE BP

The Propaq Encore monitor is intended to be used by skilled clinicians for multiparameter vital signs monitoring of neonatal, pediatric, and adult patients in health care facility bedside applications; as well as for intra- and interfacility transport.

Features common to all models:
ECG, 3-lead or 5-lead configurations, 0.05-40/0.5-40 Hz
NIBP, with neonatal, pediatric and adult modes
Temperature, 2 channels: YSI 400 and 700 series-compatible connectors
Defibrillator Synchronization
Real-time Analog output of ECG
Electrocautery noise suppression on all channels except Impedance
Pneumography
206EL
Two Invasive Pressure Channels

Features:
Continuous monitoring in challenging transport environments
Optional connectivity to Acuity® Central Station for truly flexible monitoring
Offers durability and long battery life
Custom selection of up to 4 viewable waveforms
Adult, pediatric and neonatal modes for customized monitoring

Includes the following Cables and Accessories:
Welch Allyn Propaq Encore 206 EL Monitor Option Number 229 or 223
Welch Allyn Adult NIBP Hose
Welch Allyn Temperature Sensor
Welch Allyn ECG Cable, 5 Lead, Attached Lead Wires
Welch Allyn Thigh Cuff
Welch Allyn Adult Cuff
Welch Allyn Child Cuff
Propaq Encore Reference Guide and Service Manual in CD or BOOK Form
Welch Allyn Power Supply
Welch Allyn Lead-Acid Battery Rechargeable
OxiMax DS-100A Durasensor Adult Oxygen Sensor
Nellcor Sensor Extension Cable REF DEC8

Learning the Propaq Encore by Using in-service mode

You can practice using the Propaq Encore without a patient simulator by using the Propaq's in-service mode of operation. The in-service mode cannot be activated while you are monitoring a patient. The message “SIMULATING” alternates with the time of day and patient mode on the display.
To begin practicing with your Propaq, disconnect all patient cables connected to the monitor. Leave the cuff connected so you can take NIBP measurements. If you have been monitoring a patient, turn off the Propaq Encore and turn it back on. From the Main Menu, press SETUP, WAVE SEL, INSERV.
The Propaq Encore has two sets of simulated patient information—an initial set and an alternate set. To change between them, press the INSERV button again. If you connect a patient cable or set the NIBP channel to automatically take pressure measurements, the Propaq Encore stops simulating, goes through its powerup tests, and erases any simulated trend data it might have stored

Links below
Propaq Reference manual
https://www.welchallyn.com/content/dam/welchallyn/documents/sap-documents/LIT/810-0/810-0696-04LITPDF.pdf
Electromagnetic Compatibility Guide
https://www.welchallyn.com/content/dam/welchallyn/documents/upload-docs/Research/Reference/Electromagnetic-compatibility-_EMC_-compliance-Propaq-Encore_Reference.pdf
Propaq Quick Tips
https://www.welchallyn.com/content/dam/welchallyn/documents/upload-docs/Training-and-Use/Quick-Reference-Guide/MC4978_Blood-Pressure-Accuracy-and-Variability_Quick-Reference-Guide.pdf
Propaq Replacement Cuff Guide
https://www.welchallyn.com/content/dam/welchallyn/documents/upload-docs/Other/Matrix%20Photos/Blood%20Pressure%20Matrix/MC12709_replacement_cuff_WR.pdf
Propaq Reference Guide
https://www.welchallyn.com/content/dam/welchallyn/documents/sap-documents/LIT/810-0/810-0640-06LITPDF.pdf

This equipment is located in US