Used Velonex 515 For Sale

Asking Price
$600
Stock:
Only 1 Available on the Marketplace!
Seller:

James C.

Member since: March 2013

More listings by this seller

Contact the Seller
Name:
Velonex 515
Listing Reference:
487964
Price:
$600
Location:
USA
Age:
Unknown
Description:

The Velonex 515 Surge Transient Generator is designed to produce the Surge

Withstand Capability (SWC) wave shape and characteristic that meet and exceed

those required by the IEEE/ANSI standard C37.90a-1978 (formerly IEEE standard

472-1974).The Velonex 515 Generator is an easy-to-operate completely solid-

state and fully shielded instrument, providing bursts of damped sine waves.

This unit is completely protected against damage by a momentary or sustained

external short. It is fully shielded to prevent extraneous burst signals from

feeding into any external equipment, and solid-state design eliminates jitter

and erratic performance. Please note the equipment us shown underpower but calibration

state is unknown!

515 INFORMATION
Test Burst Rate: Manual one-shot, plus continuously variable from <20 bursts
per second to >120 bursts per second, plus 60 Hz or 120 Hz synchronized with
power line. Phase or burst is adjustable through >320° with respect to
power-line frequency, plus external trigger one-shot to 120
bursts per second.

Test Duration: Continuously adjustable from <2 seconds to >10 seconds by
front panel control, plus a front panel indicator for test in progress.

Output Isolation: Output Isolation is provided on the inner conductors of
two type UG-931 High-Voltage Connectors. Output may be directly applied to
any power line voltage up to 500VRMS. Transient burst signal generator is
fully shielded to prevent unwanted radiation or conduction of signal.

Shielding: Transient burst signal generator is fully shielded to prevent
unwanted radiation or conduction of signal.

Monitor Output: A low-level 1000 :1 attenuated output referenced to ground
is provided for scope monitoring.

Trigger Output: A front panel scope trigger output signal is provided, which
is present prior to turning the high voltage on.

High Voltage: Two push buttons (located on opposite sides of the instrument)
must be simultaneously pushed in order to obtain high voltage output.
Input Voltage: 115V±10%, 60 Hz
Input Power: 100 Watt
Weight: 70Lbs

Used equipment can sell very quickly. Contact the seller asap to discuss this Velonex 515.

Contact the Seller
Asking Price
$600
Stock:
Only 1 Available on the Marketplace!
Seller:

James C.

Member since: March 2013

More listings by this seller

Contact the Seller

Related Auction

Contact the Seller

Contact the Seller

* required field

Your question will be sent to the seller immediately and we will email you as soon as they reply.