Specifications

Strength 100 T
Folding length 3110 mm
Distance between uprights 2700 mm
CNC AMADA OPERATEUR
Throat 470 mm
Vertical stroke 200 mm
Working speed 10 mm/s
Axis number 8
-------------------
Length x width x height 3680.0 × 2185.0 × 2635.0
Weight 6750 kg
Worked hours 17575 hours
Hours under power
State good
At local norms ---------
Status

Description

Technical specifications
pressure:
100 t
chamfer lenght:
3110 mm
distance between columns:
2700 mm
column arm:
400 mm
dayligth:
470 mm
stroke:
200 mm
ajustment speed:
100 mm/sec
working feed:
10.0 mm/sec
return speed:
92.0 mm/sec
table width:
90.0 mm
table height:
910 mm
oil volume:
105 l
0:
283 bar
controlled axis:
8 Anzahl
Number of working hours:
17.575 h
total power requirement:
7.5 KW
weight of the machine ca.:
6750 kg.
range L-W-H:
3680 x 2185 x 2635 mm
Description
** very good / well-maintained condition (!!)
** with only 17.575 operating hours

- in checked condition - machine video -
https://www.youtube.com/watch?v=BXxlx7s8sYY

Equipment:
- CNC electro-hydraulic press brake
- CNC control AMADA OPERATEUR
- CNC controlled 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
- swiveling control panel, front left
- CNC-controlled back stop adjustment (X-axes)
- CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis)
- CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
- upper tool holder with wedge camber
- side protective device (swivelling doors)
- rear protective device (swivelling door)
- 1x 2-hand control / 1x foot switch
- CE marking
- original machine documentation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2012
Offers online 30
Last activity Nov. 5, 2024

Description

Technical specifications
pressure:
100 t
chamfer lenght:
3110 mm
distance between columns:
2700 mm
column arm:
400 mm
dayligth:
470 mm
stroke:
200 mm
ajustment speed:
100 mm/sec
working feed:
10.0 mm/sec
return speed:
92.0 mm/sec
table width:
90.0 mm
table height:
910 mm
oil volume:
105 l
0:
283 bar
controlled axis:
8 Anzahl
Number of working hours:
17.575 h
total power requirement:
7.5 KW
weight of the machine ca.:
6750 kg.
range L-W-H:
3680 x 2185 x 2635 mm
Description
** very good / well-maintained condition (!!)
** with only 17.575 operating hours

- in checked condition - machine video -
https://www.youtube.com/watch?v=BXxlx7s8sYY

Equipment:
- CNC electro-hydraulic press brake
- CNC control AMADA OPERATEUR
- CNC controlled 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
- swiveling control panel, front left
- CNC-controlled back stop adjustment (X-axes)
- CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis)
- CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
- upper tool holder with wedge camber
- side protective device (swivelling doors)
- rear protective device (swivelling door)
- 1x 2-hand control / 1x foot switch
- CE marking
- original machine documentation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Strength 100 T
Folding length 3110 mm
Distance between uprights 2700 mm
CNC AMADA OPERATEUR
Throat 470 mm
Vertical stroke 200 mm
Working speed 10 mm/s
Axis number 8
-------------------
Length x width x height 3680.0 × 2185.0 × 2635.0
Weight 6750 kg
Worked hours 17575 hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2012
Offers online 30
Last activity Nov. 5, 2024

Here is a selection of similar machines

AMADA HFBO 100.30 Press brake cnc/nc