Specifications

Max. tube Ø 63 mm
Engine Power 18 kW
-------------------
Weight 6700 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status

Description

• Near new, very little use due to a change in contracted works.
• Produced less than 150 parts.
• The bender has an extended bed and is fully optioned, equipped with a laser part positioner.

No experience is needed to use ELECT: All movements are managed by an electric axis. Set-up is automatic, and all position and power parameters are saved together with the part program.

Technical Information

Round tube max. bending capacity
Diameter - 2.48" (63mm)
Thickness - .157" (40mm)

Bending direction RH or LH convertible
Axes 9
X Accuracy +/- 0.05 mm
Y Accuracy +/- 0.05 degrees
Z Accuracy +/- 0.05 degrees
Clamp edge 81.10" / 2060 mm
Mandrel extractor 177.17" / 4500 mm
Max. installed power 18.0 kW
Average drawn power 4.5 kW
Noise level 65 dB(A)
Weight 6700Kg
Round or special section tubes

Not only round, square, or rectangle, with ELECT you can also bend special profiles. The modular die maintains uniformity along the entire curve, whatever section you are working on with the certainty of always having accurate results.

All parts are precise and repeatable

You can always count on repeatability and geometric precision of the bent part, regardless of material imperfections. Using special programs that can be selected by the operator, ELECT compensates variations in material quality and dimensional accuracy.

Quality is power under your control

Small sections even for narrow radii. High-quality appearance. No waste.
The machine can be equipped with different levels of carriage boost power (up to 60,000 N). The boost can be continuously controlled over the entire bending sequence controlling the material behaviour, such as elongation and spring-back. This ensures maximum process control to the last bend.
Quick changeover

Change the bending tools quickly and easily. With the quick-change system you exchange tooling in just 3 minutes. The set-up is automatic, and you are immediately ready for a new production.

Take no risks – choose your safety features

The pedal prevents dropping the parts at the end of the loading and unloading operations. The two-hand activation control prevents the operator from coming into contact with moving parts. To combine safety and efficiency, the laser scanner allows you to choose the size of the work area based on the size of the part you are working on. The machine is provided with the CE declaration of conformity and the user and maintenance manual.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2024
Offers online 1
Last activity Aug. 14, 2024

Description

• Near new, very little use due to a change in contracted works.
• Produced less than 150 parts.
• The bender has an extended bed and is fully optioned, equipped with a laser part positioner.

No experience is needed to use ELECT: All movements are managed by an electric axis. Set-up is automatic, and all position and power parameters are saved together with the part program.

Technical Information

Round tube max. bending capacity
Diameter - 2.48" (63mm)
Thickness - .157" (40mm)

Bending direction RH or LH convertible
Axes 9
X Accuracy +/- 0.05 mm
Y Accuracy +/- 0.05 degrees
Z Accuracy +/- 0.05 degrees
Clamp edge 81.10" / 2060 mm
Mandrel extractor 177.17" / 4500 mm
Max. installed power 18.0 kW
Average drawn power 4.5 kW
Noise level 65 dB(A)
Weight 6700Kg
Round or special section tubes

Not only round, square, or rectangle, with ELECT you can also bend special profiles. The modular die maintains uniformity along the entire curve, whatever section you are working on with the certainty of always having accurate results.

All parts are precise and repeatable

You can always count on repeatability and geometric precision of the bent part, regardless of material imperfections. Using special programs that can be selected by the operator, ELECT compensates variations in material quality and dimensional accuracy.

Quality is power under your control

Small sections even for narrow radii. High-quality appearance. No waste.
The machine can be equipped with different levels of carriage boost power (up to 60,000 N). The boost can be continuously controlled over the entire bending sequence controlling the material behaviour, such as elongation and spring-back. This ensures maximum process control to the last bend.
Quick changeover

Change the bending tools quickly and easily. With the quick-change system you exchange tooling in just 3 minutes. The set-up is automatic, and you are immediately ready for a new production.

Take no risks – choose your safety features

The pedal prevents dropping the parts at the end of the loading and unloading operations. The two-hand activation control prevents the operator from coming into contact with moving parts. To combine safety and efficiency, the laser scanner allows you to choose the size of the work area based on the size of the part you are working on. The machine is provided with the CE declaration of conformity and the user and maintenance manual.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Max. tube Ø 63 mm
Engine Power 18 kW
-------------------
Weight 6700 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2024
Offers online 1
Last activity Aug. 14, 2024

Here is a selection of similar machines

BLM ELECT63B Fully electric tube bending machine