Bobst SP 76 E Die-cutter Verified seller

Price on request

Make an offer

Manufacturer	Bobst
Model	SP 76 E
Year	1996
Location	Italy
Category	Die-cutters / Embossers / Hot foil
Product id	P250610254
Language	щанцоване Bobst SP 76 E Vysekávací stroj Bobst SP 76 E Bobst SP 76 E Udstanser Bobst SP 76 E Stanze Κόφτης Bobst SP 76 E Bobst SP 76 E Die-cutter Troqueladora Bobst SP 76 E Presse de découpe Bobst SP 76 E Izrezivač Bobst SP 76 E Bobst SP 76 E Vágószerszám Fustellatrice Bobst SP 76 E Štampas Bobst SP 76 E Bobst SP 76 E Stansmachine Maszyna sztancująca Bobst SP 76 E Cortador Bobst SP 76 E Decupator Bobst SP 76 E Bobst SP 76 E Высекальная машина Die-cutter Bobst SP 76 E Bobst SP 76 E Skärare Kesim Bobst SP 76 E

Details
About this seller

Specifications

Max. paper length	72 cm
Max. paper width	50 cm
Min. paper length	cm
Min. paper width	cm
Possible actions	Hot Foil Stamping
Max sheets/hour
Honeycomb Chase	Yes
-------------------
worked hours
hours under power
state	as-is, where-is
At local norms	---------
status
Datasheet	Bobst SP 76 E
Last availability date	08/12/2025

Description

B-1 ELEVATED MACHINE Machine elevated 400 mm, included elevation of the steps

Gripper bars

Centerline system for quick job changeover

Adjustable centering at the stripping and at the delivery

Air conditioning for the electrical cabinet

Electronic device for sheet travel control

Main motor with frequency variator

B-7 PLATFORM

Platform covered with non-slip aluminum sheet with safety barrier

C.U.B.E. (Control Unit Bobst Electronic) for machine operation

C-4 NON-STOP FEEDER MANUAL DEVICE

Suction unit with multiple adjusting

Pile rear guide (OS and OOS sides)

Adjustable table feeder

Pile-tray with handle allowing manual lateral correction of the pile during production

Adjustable lateral blowers with Centerline references

Safety system for lowering the pile try

1 Transport belt. With lateral guidance

4 front lays, adjustable in pairs with front register control

1 Sheet-hold down device (guiding the sheets to front lays)

1 Upper transport equipment for paper, paperboard and corrugated board

C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES

D-73 FEED BELT SLOW-DOWN DEVICE Ensures smooth arrival of sheets against the front registers

Covered with an anti-static stainless steel plate

1 Double sheet detector

Pull-lay operator side (OS) adjustable according to Centerline, with sheet control

1 Cutting plate (E-4)

1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness

Equipment centering and locking

Locking of the chase against the upper beam

Resocell: synthetic material supporting plate. Thickness 22.5 mm

E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL

E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC)

Grippers re-opening device

Measurement of the die-cutting force with strain gauge

1 Upper Stripping Frame (F-2)

F-21 1 UPPER STRIPPING EQUIPMENT REQUIRED TO CREATE A WASTE STRIPPING TOOL, INCLUDING CROSSBARS, CLAMPS, STRIPPER HOLDERS AND STRIPPING PINS OF 3, 5 AND 10 MM OF DIAMETER. 1 unit comes with the basic machine

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Client type	Reseller
Active since	2019
Offers online	70
Last activity	Dec. 6, 2025

Description

Specifications

Max. paper length	72 cm
Max. paper width	50 cm
Min. paper length	cm
Min. paper width	cm
Possible actions	Hot Foil Stamping
Max sheets/hour
Honeycomb Chase	Yes
-------------------
worked hours
hours under power
state	as-is, where-is
At local norms	---------
status
Datasheet	Bobst SP 76 E
Last availability date	08/12/2025