PCB and SMT equipment 1,135

MKS ASTeX Astron2L AX7657-85 RPS, in stock, used. Tested and in good condition. Can ship. Not limited to the posted semiconductor units, we have one …

Wafer/Substrate size: up to 6”/150 diameter X,Y, Theta Stage Planarity over 6”: <10 µm Resolution: 5 µm Range of movement: 155 x 155 mm Load s…

100 cm Date: 2013 Voltage: 220-240 Vac Current: 1 A Frequency: 50 Hz Air Pressure: 0,5 Mpa

1 12xhead 1 6xhead Single transport, pipette changer , good condition, from prototype center

SMT High-Speed-Placer with 3 gantries PA 1: DLM2/CP12 PA 2 : Twin Single lane Transfer L->R SW: xxx.xx needs 4 feeder trolleys 00119722.

Inline stencil printer • 100% pressure control • Camera line camera • PCB size max. • 550x500mm • Stencil size: • max.750 x 750 mm • min. 450 x 450 m…

Model: Hyper Vision Model number: S5A Voltage: 220-240 VAC Frequency: 50-60 Hz Current: 10A Weight: 840 Kg

Screen Frames Specification 736 x 736 x 38/40mm (29′′ x 29′′) Board Handling Specification Minimum Size 40 x 50mm Maximum Size 510 x 508mm (620 x…

Very Nice Universal Multi Module For Sale Good working condition See attached pictures and information below Equipment Description Universa…

The contact angle meter provides information on the adhesion energy of the solid surface and the surface tension of the drop. It has been widely acce…

Motan CTT 300 Dryer controller Brand: Motan Model: CTT300 Type: Dryer controller Capacity: 300l Voltage: 230 VN/PE Connected Load: 3.0 k…

BTU Pyramax Z12 150N Reflow Oven (2014) Flow Direction: Left to Right Edge rail only Center Board Support Max Temp: 350 C High-end Soldering n…

AE Cesar 1350, available, in good condition, can ship. All units are tested before entering and leaving the warehouse. Each unit will come with a tes…

Hi, We have available for sale UIC feeders 1. 50381214 8mm High Performance DL-60 (Gold Plus) 7-13" Qty:200pcs 2. 50934707 8mm HP Gold Plus Qty…

Status: Good working condition Alignment: Flying Vision Number of Spindles: 2 Gantry x 10 Spindles/Head Gantry Placement Speed: 75,000 CPH (Opti…

Essemtec FLX 2010V with tray exchanger 10pcs

preheating below 7 zones direction: Right-Left protective gas equipment 02 display / control electrical width adjustment active cooling below…

Status: Good working condition CB size (LXW) Up to 457 x 356 mm Thickness 0.4 (0.3) to 5.0 mm (XPF-L) / 686 x 508 mm Thickness 0.4 to 6.5 mm (XPF-…

The PVA IR2000 Stove is a high-performance machine designed for a variety of applications. It operates on a power requirement of 208, 230, 400, 460 V…

BROOKS AUTOMATION 1SET BROOKS ROBOT 017-0036-01 BROOKS CONTROLLER 002-9400R07

EUNIL EBU-400 is a state-of-the-art PC Board Assembly and Manufacturing Equipment. Designed for mass production, it automates and streamlines the ent…

Description Nutek Inspection Conveyor, XXL size Type: NTM510ICXXL-1000-1 Year of Manufacture: 2013 Direction: Left to Right Transfer height: 9…

Model: DEK ELA Category: Serigrafica / Screen Printer Model Year: 2002 Serial: 276725 Condition: refurbished Location: Italy – Padua …

2 1/2 D Inspection Auto Stencil Wiper EVA™ Vision system 550 x 550mm Max Board Size Power requirements 230 V 50/60 Hz, 1 KW Air supply requi…

AE Advanced Energy Apex3013 RF Generator, 3000W 13.56MHz Condition: Refurbished, working Qty: 1 unit Lead time: 4-6 weeks Warranty: 3 months

USED CTI CRYOGENICS 9700 COMPRESSOR

O2N2 SITE Gas Systems N-15-T Nitrogen Generator: Brand: ON SITE GAS SYSTEMS, INC. Model: N-15-T Flow rate (volume) @ purity level: 67 SCFH at …

Essemtec Pantera XV yom 2010, -Laser and Vision -Manuals -feeders: CSM 740i 8mm 19x CSM 740EP 8mm 20x CSM 740EB 8mm 20x CSM 741i 12mm 4x CSM 74…

JUKI FX-1, vintage 2004, working condition. Located in the UK. Further information upon request.

Description Nutek Dual Track Linking Conveyor, 2 x 500mm Type: NTM410DT-1000-2 Year of Manufacture: 2015 Direction: Left to Right, 1stTrack Fro…