Horizontal Machining Centre 186

- Fixed Position Management 100 Pos. - Tool Change Time (Tool / Tool) Sec.1,3 - Tool Change Time (Chip / Chip) 3.0 Sec - Dia. Max P / Adjacent Too…

This Quaser MK603HPD Horizontal Machining Center from 2004 was built in Taiwan. It is equipped with a Fanuc Series 18I-MB control unit. This 4 axis m…

Type: BA W04-22 Producer: SW Made in: 2007 Characteristic: Control system: SIEMENS Sinumerik 840D Maximum table load (evenly distributed): 2 x…

Machine complete with high pressure at 50 bar with paper filter, continuous table, 60 tools. Condition Used Pallet change yes to 2 positions Tab…

CNC controller: MAZATROL MATRIX Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 B-axis degrees: 360º (0,001º) Worktable …

CNC controller: MAZATROL 640m Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 B-axis degrees: 360º (0,001º) Worktable N…

Control: Fanuc 31i Under Power: Yes Pallet: Pallet Size (2 Pallets): 31.5" x 31.5" Pallet Indexing: 4 Axis Maximum Load On Pallet: 3,500 lb …

MAZATROL MATRIX 2 x-axis (strokes) 800 y-axis (strokes) 800 z-axis (strokes) 800 Board length (plank) 500 Board width (board) 500 size max. pie…

CNC MATRIX 2 x-axis (strokes) 730 y-axis (strokes) 730 z-axis (strokes) 800 Board length (plank) 500 Board width (board) 500 size max. piece (l…

Table size 500 x 500mm Fanuc or the MCs x-axis (strokes) 700 y-axis (strokes) 610 z-axis (strokes) 610 Maximum spindle rotation speed 10,000rpm …

The machine is in good technical condition. Maximum workpiece height (mm) 640 Maximum workpiece diameter (mm) ø570 Maximum tool length (mm) 300 Maxim…

Type: BA 400-2 Producer: SW Made in: 2008 Characteristic: Control system: Siemens Sinumerik 840D Maximum spindle speed: 1750 1/min Number of…

CNC controller: MAZATROL 640m Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 B-axis degrees: 360º (0,001º) Worktable N…

Control: Fanuc 31iA5 Condition: Used - Excellent Pallet: Pallet Size (2 Pallets): 39.4" x 39.4" Pallet Indexing: 0.001 degree Maximum Load…

Type: MA 50 HB Producer: OKUMA Made in: 2001 Characteristic: Control system: OSP U100M Length of the working table: 500 mm Width of the work…

The machine is in good technical condition, it is possible to test it in operation by agreement. Collection possible 07/2023. X, Y, Z axes - 1000 x 8…

Well maintained used machine, delivery (Feb/March 23) Government unit MazaK FUSION 640 M x-axis (strokes) 1300 y-axis (strokes) 1100 z-axis (stro…

This Matsuura H-PLUS-405 Horizontal Machining center was manufactured in Japan in 2011. It is equipped with a Siemens 840Di control unit. This 3 axis…

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control …

X - Travel: 600mm Y - Travel: 600mm Z - Travel: 600mm B-Axis indexing: 360.000° Table Length: …

x-way 800 mm y-way 800 mm z-way 800 mm Control SIN 840D Rotary table 360,000 x 0.001 ° Pallet size 500 x 630 mm Workpiece weight 800 kg Spindl…

Made in Taiwan Pallet size 500 x 500 mm Travel : 710-610-610 mm Spindle to Table : 50-660 mm Max work pieceTable index swing : Dia 680/760 mm Ta…

This Makino A77 horizontal machining center was manufactured in 1997 and refurbished in 2017, including a new spindle. This 4 axis machine has a spin…

Daewoo DHC-400 Horizontal Machining Center, 2005, 10,000 rpm, Cat 40, 40 atc, cts, Fanuc 21 X 23.6" Y 22" Z 22.2" Power 24 hp RPM 10,000 RPM …

X, Y, Z axes - 1000 x 800 x 850mm. Pallet size 630 mm. Maximum pallet load 800kg. The machine is currently out of service, the following repairs are …

Specifications X 28.7 Y 25.6 Z 31.5 RPM 14000.0 # ATC 60.0 Taper CAT40 Pallet-W 19.7 Pallet-L 19.7 # Axis 4.0 a61nx Horizontal Machining 4…

Doosan HP6300 Horizontal Machining Center, Cat 50, 10,000 rpm, 60 atc, full 4th X 39.4" Y 33.5" Z 33.5" Power 40 hp RPM 10,000 RPM # ATC 60 …

Specifications Axis X 730 mm Axis Y 730 mm Axis Z 800 mm Rotary table 4th axis no CNC Matrix Table length 800 mm Table width 1000 mm Max. par…

Year 1991; Fanuc 15MA-CNC Control; max workpiece L x W x H =1500 x 800 x 1000 mm x 3.000 kg; pallet 1.000 x 1.000 mm; 8 pallets; travels: X=1.500,…

Type: H40 Producer: ZPS Tajmac Made in: 2007 Characteristic: Total hours: 35000 h Length of the working table: 500 mm Width of the working t…