Plastics 1,505

Brand Brown Model T-100 Year of Mfg 1998 Voltage 550V / 3 Phase / 60 Hz Can Be Sold With Brown C-2104 Thermoformer

Extruders Features 3" OD Sheet Die Hole, 1.5" OD Die Hole Size Photos available.

Horizontal Injection Mold Manufactured 1997 Specifications Features Shot Size: 2.0 oz. Tie Bar Spacing: 14" x 14" Platen Size: 20.5" x 20.5" …

Brand : ENGEL Tie-bar less IMM ENGEL Victory 500/120 tech, year 2005, screw diam.45 mm. The machine will be delivered complete checked and repaire…

Kreyenborg 4 cavity (10 inch each) backflush screen changer in mint condition – was mated to an 180 mm single screw extruder

• Single screw ø45mm 30D • PE/PP • 130 kg/h The machine is located in France.

Type: Ergotech 35 - 115 viva Year of production: 2000 Type of control: NC 4 Control Closing system: Hydraulic TECHNICAL DATA Closing force: 35…

model 80m, 4.65 oz (132 grams), 1998, procan 2 controls, 16.1" x 16.1" (409 mm x 409 mm) tie bar spacing, 24.1" x 22.1" (612 mm x 561 mm) platens, 20…

Machine: BILLION 80T PROXIMA 310H YEAR 2007 Year: 2007 Control type: DIXIT 2 Number of hours: 32,000 H Closing Closing force: 80T Opening str…

Used Fuji Paudal model EXDFRS-60 stainless steel twin screw extruder. Twin 60mm diameter augers fitted with 0.5mm mesh screen. Unit is top manual inf…

Complete equipment for the recovery of pellets with a maximum production capacity of 200 kgs / hour Line GM 90 (CE) 1996 Production 180-200kg / h PE…

Used Automatik/Gala Model Sphero 220.1 underwater pelletizing system. Unit is rated for 22,000 lbs per hour, new 2013. 460 volt AC input. System cons…

INJECTOR DEMAG ERGOTECH 125/475-610 Year of production - 1999 NC4 command 610 injection unit diameter 45mm Injection volume 323 cm3 length / di…

Proco Take Out/De tab System – Model PRU EX2-LH – This system is currently running on a Battenfeld Fischer Model 106-1 Blow Molding Machine …

Brand Akei Model AO-70SN Extruder Estimate 70-80 ml Controller Eurotherm # of Heads 1 Upgrades Delta Drive and Eurotherm M…

GENERAL SPECIFICATIONS YEAR 1987 BRAND TOSHIBA TONNAGE 250 TON (ISE 250) SHOT SIZE 24 oz. MODEL NUMBER ISE-250N-17A TYPE HORIZONTAL OPTIONS & …

Manufacturer: Conair Receiver Model: K2CR Year: 2014 6 Receivers Available Control: -Universal Terminal Box -Model: UTB-24-D Volume ft3 (Lts) …

Brand Roboshot Model 110R-97 Year of Mfg 1997 Tonnage 110 Shot Size 3.9 oz Clamp Style Electric Platen Size 21.5" x 2…

GENERAL SPECIFICATIONS YEAR 1980 BRAND TOSHIBA TONNAGE 85 TON SHOT SIZE 3.63 oz. MODEL NUMBER ISS 85 TYPE HORIZONTAL TECHNICAL SPECIFICATIONS …

Hot Runner Manufactured 2019 Specifications Features Model: DC900-8D SYSTEM CONSISTS OF: - DC900-F12 Mainframe J/K Type T/C Farenht/Cel…

KRUPP BELLAPLAST ES 45.25D Extrusion - Single screw extruder Screw Ø45-25D, approx. 40kg/h

YEAR 2000 BRAND BOY TONNAGE 50 TON SHOT SIZE 3.04 oz. MODEL NUMBER 50M TYPE HORIZONTAL CLAMP HYDRAULIC TIE BAR DISTANCE 13.19 inches x 1…

Blow Molders Manufactured 1995 Features Model PAS-106-1 No Control

Catalog No. : 7199 Type: ES 200/60 HL ST Producer: Engel Made in: 1999 Characteristic: Clamping force: 60 t Screw diameter: 30 mm Weight of…

Year 1999 Tons 300 Shot size 28 oz Stack mold capable Good Working Condition Location: USA Video of machine running available upon request

Made in: 1998 Characteristic: Clamping force: 50 t Machine width: 3810 mm Machine height: 2000 mm Weight of the injection molding machine: 4…

Type Hydraulic Size 51" W Incline Auger – Incline Auger Size (1) 10" (1) 12" U-Trough Sink Float Tank – Sink Float ZTank Siz…

Brand Sidel Year of Mfg 1996 Cavity 1 Hopper Preform hopper/elevator included Infeed Preform orientated and infeed rail …

Used Jomar injection blow molder model 135E. New 1994. Consists of the following: – 3″ diameter screw with 25/1 L/D and 125 HP drive. – 135.4 ton P…

Type: 320 C 600 - 250 Year of production: 12/2003 Control type: Selogica Closing system: Hydraulic TECHNICAL DATA Closing force: 600 kN Clear…