Wire EDM 101

Sodick LP33W CNC Control and High Speed Generator "Super Pika W" Fine Finishing Circuit Down to Ra 0.1 um Rise and Fall Work Tank High Speed Auto …

name block CNC600T|Angle of rotation X degree 0-90|On the X axis, mm -|Course of an axis X1 mm 70|Moving along the Y axis mm 480/700|Z axis travel 18…

This Makino SP64 Wire erosion machine was manufactured in the year 2006 in Germany and has 135853 production hours. It is equipped with a MGW- 95 con…

This AGIE Excellence 2F Erosion Machine was built in 2001 in Switzerland. It has 5 axis. The machine has a workpiece dimension of 750 x 550 x 250 mm.…

Integrated C-Axis 0-40 Rpm Min. distance table to quill : 215 Max. distance table to quill: 615 With seperate coolant tank X-Axis: …

X-axis Movement: 320mm Y-axis Movement: 220mm Z-axis Movement: 116mm Workpiece x: 990mm Workpiece y: 505mm Workpiece z:…

Wire Alignment Gauge Included Angle Master Precision Taper Software CFAST Compact Flash Card Chiller Chopper Wire Chopper Round Diamond Guides I…

mitsubishi model #fx-10 cnc wire edm with submersible machining & auto wire threading specifications: max. workpiece weight: 1168 lbs ma…

This AGIE Agiecut Classic 3s Erosion Machine was manufactured in the year 2003 in Switzerland. It can work with a wire speed of 60 ÷ 300 mm/s. This m…

X-axis movement: 350mm Y-axis movement: 220mm Z-axis movement: 220mm Workpiece x: 1000mm Workpiece y: 550mm Workpiece z…

Fanuc W3 wire EDM machine Journeys: X-750, Y-450, Z-300, U-50, V-50 Max cutting angle: 10 degrees Max workpiece weight: 800 kg Programmable axes:…

Table length 500 mm Table width 400 mm Number of spline 3 T-channel width 12 mm Distance of the T-slots 125 mm Table load max. 500 kg Lon…

- maxi part size : 1260 x 690 x 360 [mm] - maxi part weight : 800 [kg] - working zone dielectric volume : 240 [l] - strokes X x Y x Z : 630 x 400 …

Year: 2002 Manufacturer: Agie Model: Classic II Control: Condition: Used Under Power: Yes Travels: - X-Logitudinal: 13.7" - Y-Cro…

X-axis movement: 350mm Y-axis movement: 250mm Z-axis movement: 256mm A-axis movement: 70mm Workpiece x: 750mm Workpiece y: 550mm…

Sodick AQ750L wire EDM machine completely overhauled with 1 year warranty as new machines. Work performed during the review. - X and Y axis tank sea…

X-axis movement: 628mm Y-axis movement: 398mm Z-axis movement: 158mm V-axis movement: 48mm U-axis movement: 48mm Workpi…

Type: 254Y Manufacturer: HITACHI Japan Year of manufacture: 2001 Programming: WireCut 5.1 Maximum dimensions of the part: 600 x 400 x 210 mm Max…

X-axis movement: 318mm Y-axis movement: 218mm Z-axis movement: 114mm V-axis movement: +/-48 U-axis movement: +/-48 Workpiece x: …

Machine weight: 3300 kg Mesurements: 2600 x 2540 x 2240 mm Movement X-axis movement: 550mm Y-axis movement: 350mm Z-axis movement: 400mm V…

CUT 300 - Year 2012. - Dimensions of complete machine: 2600mm x 2540mm x 2240mm - Total weight: 3300kg - Max; workpiece dimensions (mm): 1200 x …

CNC Control yes Type of CNC Control Makino MGW S-6 Max Workpiece Dimensions 28" x 22" x 11.8" Max Workpiece Weight 1760 pounds X-Axis Travel …

Stroke X 628mm Y-stroke 398mm Z stroke 158mm U-stroke +/- 48mm V-stroke +/- 48mm Year of construction 1996 Maximum room dimensions 1260 …

CNC control : MARK 30 Installation: 2002 Operating hours: 18230 Location : …

Control: MGW-R Under Power: Yes Table: Table Length: 28.7" Width: 19.7" Maximum Table Load: 1,760 Lbs Travels: X-Logitudinal: 17.…

This Mitsubishi FX 20 Erosion machine was manufactured in the year 1997 in Japan. The machine has a working area of X=500 mm , Y=350 mm, Z=300 mm, U=…

Type: 254Y Producer: Hitachi Made in: 2004 Characteristic: Control system: MARK-10W Travel length X-axis: 410 mm Travel length Y-axis: 260 m…

Sodick AQ900L EDM Wire Cutting Machine X : 900 mm Y : 600 mm Z : 400 mm (U/V)mm 900X620 Machine is in good condition

MACHINE ONA E 400 PRIMA Hours: 5000

X-axis movement: 400mm Y-axis movement: 300mm Z-axis movement: 250mm V-axis movement: +/- 30 U-axis movement: +/- 30 Wo…