Specifications

-------------------
Weight 2700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

The COMPART S44.004 bridge cutting machine was built in 1995 in Germany. The machine, aimed at mass production, is intended mainly for fast and accurate cutting in various types of soft, non-metallic materials, but it can also be used as an extruder . Material taken from rolls or sheets is processed with a maximum force of 25 tons by a cutting head that moves on a horizontal moving beam. This solution allows the cutting plane to be extended to allow the operator to position the die and insert and remove the cut material. The offer also includes a screw compressor with an air tank with a capacity of 400 l. The COMPART bridge press has previously operated on polyethylene-based foams. The total weight of the machine is 2700 kg.

Technical data of the COMPART S44.004 die-cutting press

- cutting force: 25 t (250 kN)
- cutting speed: approx. 85 mm/s
- stroke adjustment range: 15-120 mm
- return feed speed: approx. 150 mm/s
- screw compressor with a 400 l tank
- hydraulic motor power: 2.2 kW
- trolley motor power: 3 kW
- clamping beam feed motor power: 2 kW
- noise level: approx. 75 dB(A)
- power supply: 3x 380 V; 50 Hz
- dimensions (length x width): 4000 x 8300 mm
- weight of the screw compressor: 140 kg
- weight of the S44.004 cutting machine : 2700 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2010
Offers online 333
Last activity Oct. 6, 2024

Description

The COMPART S44.004 bridge cutting machine was built in 1995 in Germany. The machine, aimed at mass production, is intended mainly for fast and accurate cutting in various types of soft, non-metallic materials, but it can also be used as an extruder . Material taken from rolls or sheets is processed with a maximum force of 25 tons by a cutting head that moves on a horizontal moving beam. This solution allows the cutting plane to be extended to allow the operator to position the die and insert and remove the cut material. The offer also includes a screw compressor with an air tank with a capacity of 400 l. The COMPART bridge press has previously operated on polyethylene-based foams. The total weight of the machine is 2700 kg.

Technical data of the COMPART S44.004 die-cutting press

- cutting force: 25 t (250 kN)
- cutting speed: approx. 85 mm/s
- stroke adjustment range: 15-120 mm
- return feed speed: approx. 150 mm/s
- screw compressor with a 400 l tank
- hydraulic motor power: 2.2 kW
- trolley motor power: 3 kW
- clamping beam feed motor power: 2 kW
- noise level: approx. 75 dB(A)
- power supply: 3x 380 V; 50 Hz
- dimensions (length x width): 4000 x 8300 mm
- weight of the screw compressor: 140 kg
- weight of the S44.004 cutting machine : 2700 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

-------------------
Weight 2700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2010
Offers online 333
Last activity Oct. 6, 2024

Here is a selection of similar machines

COMPART S44.004 bridge cutting machine