Specifications

Working width 3000 mm
Working length 1200 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status dismantled

Description

Automatic Powder Coating Line of German production EISENMANN

Maximum painting size (LxBxH) 3000x1200x2400mm.

Load of a traverse of 800 kg

Chain speed adjustable up to 2.5 m / min.

Automatic two-treatment spray washer. Two 3m3 tanks

Automatic two-treatment spray washer. Two 2m3 tanks + additional rinsing treatment with Demi water

Hand washer

Automatic tunnel dryer, length 7 m + gas burner

Powder coating booth made of stainless steel, manual two-station, length 4m. Controlled by a Siemens touch panel

Automatic powder coating cabin made of stainless steel, length 8m. Two Wagner automatic manipulators + two control and manual painting stations.

STS fire detection and extinguishing system, Cabin controlled by a Siemens touch panel.
Identification of details with special tags.
There are plates with identification holes above the workpiece sling.
Based on them, the controller in combination with a photocell recognizes the painted detail, turns the guns on and off at the right time - thus saving energy and powder paint.

The use of light gates with multiple sensors horizontally and vertically Wagner
This solution allows for precise measurement of the dimensions of the detail, thanks to which it is also possible to control manipulators.

The gas painting oven with two fans, two-track 18m long, allows for heating 12 three-meter traverses

The refrigerator for details after the polymerization process with heat recovery 18x4x5m in the winter returns to the hall through a heat exchanger. In summer, hot air is exhausted outside the building.

Area for unloading and loading details with an elevator controlled by a 800 kg remote control

Chain tensioning station

For those interested. More photos, videos by E-mail, More information by phone. You can also come and see it live.

The entire line of automatic painting controlled and programmed from the central SIEMENS SIMATIC HMI touch panel, SEW inverters, Wi-Fi connectivity

The EISENMANN varnishing line was used in the MAN Germany factory. The cost of a new paint shop of this type is 2-2.5M €

Possibility to buy an automatic RotoJet shot blasting line, manual shot blasting plant and spray painting sections of parts after shot blasting that do not require powder coating with a dryer and a 7m gas burner designed and fitted to this powder paint shop. Top-shelf equipment. With these devices, cooperation with the MAN factory is possible

The line is being demolished. Possible transport to the future investor.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2020
Offers online 1
Last activity Oct. 1, 2024

Description

Automatic Powder Coating Line of German production EISENMANN

Maximum painting size (LxBxH) 3000x1200x2400mm.

Load of a traverse of 800 kg

Chain speed adjustable up to 2.5 m / min.

Automatic two-treatment spray washer. Two 3m3 tanks

Automatic two-treatment spray washer. Two 2m3 tanks + additional rinsing treatment with Demi water

Hand washer

Automatic tunnel dryer, length 7 m + gas burner

Powder coating booth made of stainless steel, manual two-station, length 4m. Controlled by a Siemens touch panel

Automatic powder coating cabin made of stainless steel, length 8m. Two Wagner automatic manipulators + two control and manual painting stations.

STS fire detection and extinguishing system, Cabin controlled by a Siemens touch panel.
Identification of details with special tags.
There are plates with identification holes above the workpiece sling.
Based on them, the controller in combination with a photocell recognizes the painted detail, turns the guns on and off at the right time - thus saving energy and powder paint.

The use of light gates with multiple sensors horizontally and vertically Wagner
This solution allows for precise measurement of the dimensions of the detail, thanks to which it is also possible to control manipulators.

The gas painting oven with two fans, two-track 18m long, allows for heating 12 three-meter traverses

The refrigerator for details after the polymerization process with heat recovery 18x4x5m in the winter returns to the hall through a heat exchanger. In summer, hot air is exhausted outside the building.

Area for unloading and loading details with an elevator controlled by a 800 kg remote control

Chain tensioning station

For those interested. More photos, videos by E-mail, More information by phone. You can also come and see it live.

The entire line of automatic painting controlled and programmed from the central SIEMENS SIMATIC HMI touch panel, SEW inverters, Wi-Fi connectivity

The EISENMANN varnishing line was used in the MAN Germany factory. The cost of a new paint shop of this type is 2-2.5M €

Possibility to buy an automatic RotoJet shot blasting line, manual shot blasting plant and spray painting sections of parts after shot blasting that do not require powder coating with a dryer and a 7m gas burner designed and fitted to this powder paint shop. Top-shelf equipment. With these devices, cooperation with the MAN factory is possible

The line is being demolished. Possible transport to the future investor.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Working width 3000 mm
Working length 1200 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status dismantled

About this seller

Client type User – small or medium company
Active since 2020
Offers online 1
Last activity Oct. 1, 2024

Here is a selection of similar machines

Automatic powder coating plant MAN Spray booth